Cisco EtherSwitch Service Modules Feature Guide
How to Configure a Switch Cluster
| Command or Action | Purpose |
Step 3 |
|
|
exit | Exits privileged EXEC mode on the cluster member service | |
|
| module to return to the command service module CLI. |
| Example: |
|
|
| |
Step 4 |
|
|
show cluster members | Displays information about the cluster members. | |
| Example: |
|
| Switch# show cluster members |
|
|
|
|
Examples
This section provides the following examples:
•Sample Output for the rcommand and show version Commands, page 59
•Sample Output for the show cluster members Command, page 59
Sample Output for the rcommand and show version Commands
The following example shows what appears when you enter the rcommand command on the command switch to see the software version running on the cluster member 3:
Switch# rcommand 3
Cisco Internet Operating System Software ...
...
Note Access to the
Sample Output for the show cluster members Command
The following example shows what appears when you enter the show cluster members command:
Switch# show cluster members ---Upstream---
SN MAC Address Name PortIf FEC Hops SN PortIf FEC State 0 0002.4b29.2e00 StLouis1 0 Up (Cmdr)
10030.946c.d740
20002.b922.7180
30002.4b29.4400 SanJuan2 Gi0/1 2 1 Fa0/11 Up
40002.4b28.c480 GenieTest Gi0/2 2 1 Fa0/9 Up
Cisco IOS Release 12.2(25)SEC
59