Cisco Systems 78-16845-01 appendix How Do I Collect Thread Dumps?, Snmptrap

Appendix J Troubleshooting

J.4.13 How Do I Collect Thread Dumps?

Note The resolution in 24-bit depth is a little lower than is possible with 8-bit depth (1152 x 900 x 76 versus 1280 x 1024 x 76), but the difference is hardly noticeable.

J.4.13 How Do I Collect Thread Dumps?

Thread dumps are helpful references when debugging the CTM process. To collect thread dumps:

Step 1 Log into the server workstation as the root user.

Step 2 On the command line, enter the following command:

thread_dumper [\<Group/Service>\]

where:

•Group is the group name for which to collect thread dumps. It can be:

–SM

–SNMPTRAP

–NE

–PM

–GW

•Service is the service name for which the thread dump is required. It can be:

–SMService

–SNMPTrapService

–CORBAGWService

–ONS15216NEService

–ONS15302NEService

–ONS15305NEService

–ONS15310NEService

–ONS15327NEService

–ONS15454NEService

–ONS15454SDHNEService

–ONS15501NEService

–ONS15530NEService

–ONS15540NEService

–ONS15600NEService

–ONS15600SDHNEService

–ONS15800NEService

–ONS15801NEService

Cisco Transport Manager Release 6.0 User Guide

J-18 78-16845-01