Appendix J Troubleshooting
J.10.5 Configuration Center, Chassis View, Diagnostics Center, and Statistics Report Problems
Step 6 If duplicate nodes are not present in the NMServer cache, open a new GUI and verify whether the node is shown in it.
Defect
•CMSCclient.log file under /opt/svplus/log. For PC Client, collect CMSCclient.log file under D:\Documents and Settings\<username>\log.
•Node data from node table for that specific node.
•ILMITopoc.log and topod.log, if there are duplicate nodes in the database.
Possible alternative
J.10.5.4 Network Element Discovery Issues
This section includes the following information:
•J.10.5.4.1 All the Cards Under a Node Are Missing, page
•J.10.5.4.2 Configuration Center, Chassis View, Diagnostics Center, or Statistics Report Does Not Show a Card, Line, or Port for a Node, page
•J.10.5.4.3 Card, Line, or Port Information Is Incorrect on Configuration Center, Chassis View, Diagnostics Center, or Statistics Report, page
•J.10.5.4.4 Configuration Center, Chassis View, Diagnostics Center, or Statistics Report Shows a Card, Line, or Port that Is Not Present in a Node, page
J.10.5.4.1 All the Cards Under a Node Are Missing
No cards are shown under a node in the Configuration Center, Chassis View, Diagnostics Center, or Statistics Report.
Step 1 Check whether the node is synced up. This can be done by using the command selnd on the CTM CLI. Step 2 If the node has not synched up, wait for it to do so.
Step 3 If the node has synced up, check whether cards are populated in the card table. If the card table is empty, collect the EM logs. See J.10.4 Equipment Management Problems, page
Step 4 Check whether NMServer has cards in its cache. This can be done by using the command nmControl on the CTM CLI.
Step 5 If cards are not present in the NMServer cache, collect the logs.
Step 6 If cards are present in the NMServer cache, use nmClient and verify whether getChildren for node's FDN returns the cards in the nmClient.<pid>.dump file.
Step 7 If cards are present in the NMServer cache, open a new GUI and verify whether the cards are shown in it.
Defect
•topod.log, ILMITopoc.log, and NMServer.log
•nmControl.dump
•CMSCclient.log
Cisco Transport Manager Release 6.0 User Guide
| ||
|