Cisco Systems 78-16845-01 appendix Figure J-3 Correlated Alarm Rule Diagram

Appendix J Troubleshooting

J.10.5 Configuration Center, Chassis View, Diagnostics Center, and Statistics Report Problems

Figure J-3 Correlated Alarm Rule Diagram

A CorrelatedRule can have any of the following:

•1 AlwaysClear (Used when a given element never has an alarm, such as in a top-level network)

•0 or more ClearAlarmCondIds

•1 new alarm (which consists of NewAlarmConditionID, NewAlarmServAffect, and so on.)

2.Correlated Bitmap Alarm Rule Type

The correlated bitmap alarm rule type is different from the correlated alarm rule type because the bitmap rule type can represent the many states an entity can be in at any one particular time. The correlated bitmap rule type is used primarily to represent line alarms. Lines can have many different alarms associated with them at any given time, such as Loss of Signal and Loss of Frame. See Figure J-4.

Figure J-4 Correlated Bitmap Alarm Rule Diagram

Cisco Transport Manager Release 6.0 User Guide

J-64 78-16845-01