Philips 765 manual Installation, Connections general

INSTALLATION

Connections general Analogue connections CD Recorder & CD Player

English

For playing back on the CD Recorder and/or the CD Player deck, the following output connections are available:

-Digital coaxial output (CD & CD-R)

-Analogue output (CD & CD-R)

We recommend that these be connected to the TAPE or CD-R input on your amplifier.

For external recording, the following input connections are available:

-Digital optical input

-Digital coaxial input

-Analogue input

For playing back on the CD Recorder and CD Player decks separately (DUAL mode), the following output connections are available:

-Digital coaxial output (CD)

-Analogue output (CD)

We recommend that these be connected to the CD input on your amplifier.

The connections to be made depend upon the possibilities your audio equipment offers. Please refer to the user manuals for your other audio equipment first.

Digital recordings, either optical or coaxial, will give the best performance in terms of audio and versatility (e.g. auto-track). (The digital optical connection is less sensitive to external disturbances).

If your equipment does not allow for digital connections, the high quality Analogue/Digital Converter on the CD Recorder/Player will ensure excellent audio performance when recordings are made from an analogue source.

Playback via the digital coaxial output of the CD Recorder/Player gives the best audio performance.

If your equipment does not offer digital connections the high quality Digital-Analog-Convertor of the CD Recorder/Player ensures a high sound quality via the analogue output.

We recommend that both digital and analogue connections be made, so that analogue recordings can be made when digital recording is not possible.

The most common ways of connecting the CD Recorder/Player are explained below. If you still have difficulties with the connections, feel free to contact the Philips Consumer Service desk in your country.

This connection must be established for the play-back CD Recorder deck and for the CD Player deck (cable 2)

Cable 1 is used only if you want to make recordings from an external analogue source.

L							CD
R		DIGITAL		R				RECORDER
				L		L
AN	OUT	OU
	ALOG		T
				IN		R
					OUT
1				ANALOG		IN
							OUT
						D
							IGITAL	IN
								OPT
						2		ICAL
				L		L		RECEIVER
				R
						R
				OUT
					IN
				TA
					PE

Use the audio cables supplied. Connect the red plugs to the R sockets, and the white plugs to the L sockets.

1For recording from an external source, connect Cable 1 to the ANALOGUE IN plug on the CD Recorder/Player and the LINE-OUT or TAPE-OUT plug on an amplifier.

Note: For recording directly from a CD player the analogue input of the CD Recorder/Player should be connected to the analogue output of the CD player.

2For playing back, connect Cable 2 to the ANALOGUE OUT plugs on the CD Recorder/Player and the INPUT plugs on an amplifier, e.g. TAPE IN, CD-R or AUX.

Note: Never use the PHONO input.

9