Philips 765 manual General Information, Set complies with the FCC-Rules, Part 15 and with 21 CFR

Page 3

GENERAL INFORMATION

CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.1

CDN Canada

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables dans la règlement sur le brouillage radioélectriques édicté par le ministère des communications du Canada.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERTED.

ATTENTION

POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON- DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

LASER

Type

Semiconductor laser GaAlAs

Wave lenght

775-795 nm (at 25°C)

Output Power

2,5 mW (Read)

 

35 mW (Write)

Beam divergence

60 degree

This warning label is located on the rearside and inside this laser product.

CAUTION: INVISIBLE LASER RADIATION

WHEN OPEN. DO NOT STARE INTO BEAM DANGER: INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

VARO! AVATTAESSA JA SUOJALUKITUS OHITEJTAESSA OLET ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE.ALA KATSO SATEESEEN.

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD VARNING!OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRALEN

or

DANGER - Invisible laser radiation when open.

AVOID DIRECT EXPOSURE TO BEAM

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC (U.S.A.) RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

NOTE

This equipment has been tested and found to comply with

If this equipment does cause harmful interference to radio

the limits for a Class B digital device, pursuant to part 15

or television reception, which can be determined by

of the FCC Rules. These limits are designed to provide

turning this equipment off and on, the user is encouraged

reasonable protection against harmful interference in a

to try to correct the interference by one or more of the

residential installation. This equipment generates, uses and

following measures :

can be used in accordance with the instructions, may

- reorient or relocate the receiving antenna.

cause harmful interference to radio communications.

- increase the separation between the equipment and

However, there is no guarantee that interference will not

receiver.

occur in a particular installation.

- connect the equipment into an outlet on a circuit

 

different from that to which the receiver is connected.

 

- consult the dealer or an experienced radio/TV technician

 

for help.

IMPORTANT

THIS PRODUCT WAS FCC VERIFIED UNDER TEST CONDITIONS THAT INCLUDED USE OF SHIELDED CABLES AND CONNECTORS BEWTEEN SYSTEM COMPONENTS. IT IS IMPORTANT THAT YOU USE SHIELDED CABLES TO REDUCE THE POSSIBILITY OF CAUSING INTERFERENCE TO RADIOS, TELEVISION SETS AND OTHER ELECTRONIC DEVICES.

IF YOU HAVE ANY PROBLEMS CONTACT YOUR DEALER.

ANY CHANGE OR MODIFICATIONS TO THE EQUIPMENT BY THE USER NOT EXPRESSLY APPROVED BY THE GRANTEE OR MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE SUCH EQUIPMENT.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CDR 765 CD Recorder/Player CD-R RECORDER/PLAYER Limited WarrantyFor help General InformationSet complies with the FCC-Rules, Part 15 and with 21 CFR Following measuresEnspañol Français English ContentsImportant Safety Instructions Welcome CD-Audio Recordable CD-R discs Disc for recording Maintenance EnglishAccessories Discs for playbackCD player Operating Buttons and ConnectionsOperating buttons on the front CD recorder Connections on the backCD player section DisplayDisplay explanation English CD recorder sectionDisplay messages Connections general InstallationNever use the Phono input Analogue connection CD Player deckPress ON/OFF to turn the CD Recorder/Player on Power supplyInserting batteries in the remote control Setup recommendationsIf you insert a blank or partly-recorded CD-R or CD-RW Remote Control & Inserting DiscsEnglish Remote control commands Inserting discsPreparing for normal and high-speed dubbing RecordingRemarks about recording Normal and high-speed dubbingNormal speed DUBB-1, pauses will not be added Digital recording from an external CD PlayerPause cannot be operated during Dubb Short pauses will be added between the tracks. If youStart synchronized digital recording Start digital recordingIf DIG also flashes, the digital connection is incorrect Preparing for synchronized digital recordingStart analogue recording With Auto Track off, the Auto Stop mode is disabledPreparing for analogue recording Stop the sourceFinalizing CD-R & CD-RW discs Unfinalizing CD-RW discsFor CD-RW discs only To erase the last track Erasing & PlayingErasing CD-RW discs Playing CDs on Deck 1 and/or Deck Playing as a 2-disc changerRepeat CD, track or program PlayingSelecting a track or searching Shuffle random order playClearing a program Programming‹ Prog will flash and Prog CDr or Press Play to start programmed playFixing Problems TroubleshootingDiagnostic program Généralités FrançaisCaractéristiques techniques Entretien Français AccessoiresDisques destinés à l’enregistrement Disques destinés à la lectureFrançais Commandes ET ConnexionsCommandes en façade CD recorder Connexions à l’arrièreSection réservée au lecteur de CD AfficheurAfficheur description Section réservée à l’enregistreur de CDDubb Afficheur messagesRemarque N’utilisez jamais l’entrée Phono Généralités sur les connexionsRemarque ’utilisez jamais l’entrée Phono Connexions analogiques du lecteur de CDConnexions optiques numériques de l’enregistreur de CD Mise en place des piles dans la télécommandeConseils d’installation Alimentation‹ Le type de disque s’allume sur l’afficheur Telecommande ET Mise EN Place DES DisquesFrançais Commandes à distance Mise en place des disquesPréparation pour la copie à vitesse élevée et normale EnregistrementRemarques préliminaires Copie à vitesse élevée et normaleDUBB-1 cela ne se produit pas Remarque La pause n’est pas active pendant DubbRemarque La pause n’est pas active pendant DUBB-1 Lecteur de CD externeDémarrage de l’enregistrement numérique synchronisé Démarrage de l’enregistrement numérique‹ Record clignote PréparationDémarrage de l’enregistrement analogique Enregistrement analogique depuis une source externeLa finalisation dure au moins 2 minutes Finalisation disques CD-R et CD-RWAnnulation de la finalisation disques CD-RW Dans les 3 secondes, sur RecordChangeur à 2 disques Effacement ET LectureEffacement des disques CD-RW PlatineLecture en mode aléatoire Shuffle LectureSélection d’une plage ou recherche Programmation Appuyez sur Play pour démarrer la lecture du programmeEffacement d’un programme EN CAS DE Problemes Programme de diagnosticDépannage Información General EspañolDatos técnicos CD-audio grabables CD-R Discos para grabación MantenimientoDiscos para reproducción AccesoriosEspañol Controles Y ConexionesControles del panel frontal CD recorder Conexiones del panel posteriorSección del reproductor de CD PantallaDescripción de la pantalla Español Sección de la grabadora de CDMensajes de pantalla Observación No utilice nunca la entrada Phono InstalaciónConexiones generales ConexionesanalógicasdelreproductorylagrabadoraObservación No utilice nunca la entrada Phono giradiscos ConexionesdigitalescoaxialesdelagrabadoradeCDPulse ON/OFF para encender la grabador/reproductor de CD Recomendaciones de configuraciónAlimentación Inserción de las pilas en el mando a distancia‹ La pantalla le informará sobre el tipo de disco insertado Mando a Distancia E Inserción DE DiscosÓrdenes del mando a distancia Inserción de discos Pista posterioPreparación para la copia a velocidad alta o normal GrabaciónObservaciones sobre la grabación Copia a velocidad alta y normalInicio de la copia a velocidad normal pista o programa Inicie la grabación digital sincronizada Comienzo de grabación digitalObservación Si está activada la función Auto Track Preparación para la grabación digital sincronizadaPara interrumpir momentáneamente la grabación, pulse SegundosPreparación para la grabación analógica Inicie la grabación analógicaSólo discos CD-RW GrabacionUltimación de discos CD-R y CD-RW Rehabilitación de discos CD-RWBorrado Y Reproducción Borrado de discos CD-RWUso como cambiador de 2 discos Repetición de CD, pista o programa ReproducciónSelección de una pista o búsqueda Reproducción al azar orden aleatorioProgramación Pulse Play para dar comienzo a la reproducción del programaBorrado de un programa Detección DE Problemas Solución de problemasPrograma de diagnóstico 3104 125

765 specifications

The Philips 765 is an innovative and advanced television that embodies cutting-edge technology and exceptional design, making it a standout product in the competitive market of consumer electronics. This model showcases a fusion of superior picture quality, user-friendly features, and modern aesthetics, appealing to tech enthusiasts and casual viewers alike.

At the heart of the Philips 765 is its state-of-the-art OLED display, which delivers stunning visuals with incredibly deep blacks and vibrant colors. The OLED technology provides a higher contrast ratio compared to traditional LED displays, ensuring that viewers can experience a broader color spectrum and more lifelike images. The 4K resolution further enhances the viewing experience, offering crisp details and clarity that brings movies, shows, and games to life.

One of the standout features of the Philips 765 is its support for HDR (High Dynamic Range) formats including HDR10+ and Dolby Vision. This capability allows the television to adjust brightness and contrast on the fly, resulting in images that are not only brilliant in daylight but also beautifully detailed in darker scenes. The integration of Ambilight technology is another hallmark of Philips televisions, and the 765 is no exception. Ambilight creates an immersive viewing experience by projecting light from the sides of the TV, matching the on-screen content and enhancing the overall atmosphere within the room.

With a commitment to connectivity and smart features, the Philips 765 comes equipped with various connectivity options including HDMI 2.1, USB ports, and wireless connectivity. This ensures compatibility with a wide range of devices, from gaming consoles to streaming services. The TV runs on a user-friendly smart TV platform, providing access to popular streaming applications and services, making it easy for users to enjoy their favorite content.

Moreover, the Philips 765 features integrated audio technology that complements its visual prowess. With Dolby Atmos support, the TV offers an immersive audio experience, allowing viewers to feel as though they are part of the action. This combination of high-quality sound and visuals makes the Philips 765 an ideal choice for home theaters and entertainment setups.

In summary, the Philips 765 is a remarkable television that encompasses advanced OLED technology, HDR capabilities, immersive Ambilight features, and robust smart functionalities. Its exceptional design and performance make it a worthy addition to any modern living space, promising an unparalleled viewing experience.
Top Page Image Contents