Philips 765 manual Recording, Remarks about recording, Normal and high-speed dubbing

Remarks about recording

You will soon discover how easy it is to make your own CDs. Nevertheless, we recommend that you use a CD-RW disc for your first try. The two ways to make recordings are described below:

RECORDING

Normal and high-speed dubbing

Use the dubbing feature for high-speed recording from the CD Player deck to the CD Recorder deck. The quality of the original recording will be retained.

English

-Digital dubbing (normal or high-speed dubbing)

-Recording from an external source:

-Digital

-Digital with synchronized start using external CD player

-Analogue

•	The recording procedure is the same for CD-Rs or CD-RWs.
•	If the disc is a CD-RW and is already finalized you must
	unfinalize it first (page 17).

	TRACK
TAL
REM	TIME	OPEN
		CLOSE
AUSE	REPEAT 1
R
D E R	C D R
	7 6 5
	DUAL	DISPLAY
		PHONES

CD-
SYNC	DUBB	AUTO/MANUAL

• If the disc already contains recordings, the CD recorder will

automatically search for the end of the last track, so that

you can start recording from there.

• There must be at least 7 seconds of recording time left

on the disc, or you will not be able to activate the record

standby mode.

• If the display indicates COPY PROHIBIT, no digital recording

can be made of the source material. Recording will not

start or will stop after 4 seconds.

• The Serial Copy Management System (SCMS) only

allows digital recording under specific conditions:

- It is not possible to make a digital copy from a

digital copy.

- Analogue recording is always possible!

- The number of recordings from the original is unlimited.

• A maximum of 99 tracks can be recorded on a disc.

The minimum allowable track length is 4 seconds.

• Digital recordings can be made from CDs (or other sources

with an output Sample Frequency of 44.1 kHz +/- 100 ppm)

via the digital input.

• Recordings from DAT or DCC players will not stop

automatically.

IImportant:

If you want to play back the recorded CD-R disc on the CD Player deck or on any other regular CD player,

it must be finalized first. See the instructions for finalizing discs (page 17).

Finalized CD-RW discs play only on CD-RW compatible CD players.

Some comments about dubbing:

-A complete disc or program can be copied at high speed

(DUBB).

-Single tracks or programs can be copied at normal speed

(DUBB-1).

-Track numbers will be increased automatically.

-Track numbers cannot be increased manually.

Preparing for normal and high-speed dubbing

1Make sure that the recording disc is completely free of scratches and dust particles.

2If necessary, press the DUAL button to switch off the DUAL mode on the display.

‹ DUAL should be off.

RECORD		ERASE	TRACK OVER		DUAL	TRACK
	CD SYNC			SRC
FINALIZE
DUBB 1	SHUFFLE SCAN			SHUFFLE
AUTO TRACK		TOTAL REM	TRACK TIME	TOTAL REM TRACK TIME

Start high-speed dubbing (Disc copy)

1To record a complete disc or program, press DUBB repeatedly until:

‹DUBB appears and DUBB flashes on the display. After some time, BUSY and the track number will appear on the display. The CD Player will scan the tracks on the

CD and then stop.

	FINALIZE	CD SYNC			SRC
DUBB 1		SHUFFLE		SCAN	SHUFFLE
	AUTO TRACK		TOTAL REM TRACK TIME		TOTAL REM TRACK TIME
PAUSE DIG			ANALOG	OPT PROG REPEAT 1	PAUSE PROG REPEAT 1

•To see the tracks that will be recorded, press DISPLAY.

‹The track numbers will be shown in sequence.

-If NO-REC appears, the track cannot be dubbed.

-If ANALOGUE REC appears, the tracked will be dubbed analogue at normal speed.

-All other tracks will be copied in the normal fashion at double speed.

-Tracks for which DIGITAL REC appears will be digitally recorded at double speed.

13