Philips 765 manual Fixing Problems, Troubleshooting, Diagnostic program

Page 23

FIXING PROBLEMS

Troubleshooting

If you think your CD Recorder/Player is defective, it is wise to check this list first, and run the diagnostic program. Maybe you have forgotten a simple step.

Warning!

Under no circumstances should you attempt to repair the CD Recorder/Player yourself as this will invalidate the guarantee.

SYMPTOM:• SOLUTION:

No power • check to ensure that the ON/OFF button is on

•check to ensure that the power cable is plugged in correctly

•switch the recorder OFF and then immediately back ON

Auto track does not work

•check to ensure that auto track is selected.

•check to ensure that there are 3 seconds silence in between the tracks (analogue recording only)

•check to ensure that the source is a consumer source with the digital outputaccording the IEC audio standard.

No sound • check the audio connections

•if using an amplifier, try using a different source

Amplifier sound is distorted

•check to ensure that the CD Recorder/Player analogue output is not connected to the amplifier Phono input.

Play will not start

•check to ensure that the label of the CD is facing up

•clean the disc

•check to ensure that the disc is not defective by trying another disc

•make sure that the disc has been finalized for play in a CD player.

Remote control does not work

•point the remote control directly at the CD Recorder/Player

•check the batteries and replace if necessary

•select the right source first

Will not record

•clean the disc

•check to ensure that CD-RW is not finalized

•check to ensure that the disc is recordable and replace if necessary

•make sure the disc is an AUDIO disc (noAUDIO may not appear)

•wrong input source selected.

Analog recording is distorted

• make sure the recording level is correct

20 second pause between recordings

•see Synchronized digital recording (CD-SYNC) p.15

Player does not react

•switch the ON/OFF button on the front of the player off and back on

RECOUER on display

•a power failure has occured during recording, the CD Recorder/Player is attempting to repair the disc.

•if RC-DISC then appears on the display, the disc cannot be recorded further, and cannot be finalized. It can, however, still be played on the CD Recorder/Player or on another CD recorder.

•on a CD-RW disc, the track being recorded is lost, but further recording and finalization can still be done.

•If NO-OPC appears on the display, the disc cannot be used for recording. However, it can still be used as a CD on this recorder.

NO-RECon display

•While scanning a CD before recording, a non- audio track was detected. This track cannot be copied and will be skipped.

Diagnostic program

If the malfunction persists, perform the Diagnostic Program:

1Switch the CD Recorder/Player off using ON/OFF.

2Simultaneously press PLAY and STOP and switch the CD Recorder/Player back on using ON/OFF.

‹The display will now indicate BUSY and after a few minutes, the message will change to ---- or

PASSED

•If the ---- message appears, your recorder is defective and needs to be repaired. Consult your supplier or call the Philips Consumer Line to find the nearest service centre. The number of the Consumer Line can be found in the guarantee booklet.

•If the PASSED message appears, you may be misinterpreting the user instructions or using an inappropriate disc, or there may be a mechanical defect or an incorrect connection. Carefully read the user instructions once again; and if necessary contact your supplier.

•If you cannot solve the problem, contact to the nearest service centre.

3Switch off the CD Recorder/Player using ON/OFF to exit from the Diagnostic Program.

English

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CDR 765 CD Recorder/Player CD-R RECORDER/PLAYER Limited WarrantyFor help General InformationSet complies with the FCC-Rules, Part 15 and with 21 CFR Following measuresEnspañol Français English ContentsImportant Safety Instructions Welcome CD-Audio Recordable CD-R discs Disc for recording Maintenance EnglishAccessories Discs for playbackCD player Operating Buttons and ConnectionsOperating buttons on the front CD recorder Connections on the backCD player section DisplayDisplay explanation English CD recorder sectionDisplay messages Connections general InstallationNever use the Phono input Analogue connection CD Player deckPress ON/OFF to turn the CD Recorder/Player on Power supplyInserting batteries in the remote control Setup recommendationsIf you insert a blank or partly-recorded CD-R or CD-RW Remote Control & Inserting DiscsEnglish Remote control commands Inserting discsPreparing for normal and high-speed dubbing RecordingRemarks about recording Normal and high-speed dubbingNormal speed DUBB-1, pauses will not be added Digital recording from an external CD PlayerPause cannot be operated during Dubb Short pauses will be added between the tracks. If youStart synchronized digital recording Start digital recordingIf DIG also flashes, the digital connection is incorrect Preparing for synchronized digital recordingStart analogue recording With Auto Track off, the Auto Stop mode is disabledPreparing for analogue recording Stop the sourceFor CD-RW discs only Finalizing CD-R & CD-RW discsUnfinalizing CD-RW discs To erase the last track Erasing & PlayingErasing CD-RW discs Playing CDs on Deck 1 and/or Deck Playing as a 2-disc changerRepeat CD, track or program PlayingSelecting a track or searching Shuffle random order playClearing a program Programming‹ Prog will flash and Prog CDr or Press Play to start programmed playDiagnostic program Fixing ProblemsTroubleshooting Caractéristiques techniques GénéralitésFrançais Entretien Français AccessoiresDisques destinés à l’enregistrement Disques destinés à la lectureFrançais Commandes ET ConnexionsCommandes en façade CD recorder Connexions à l’arrièreSection réservée au lecteur de CD AfficheurAfficheur description Section réservée à l’enregistreur de CDDubb Afficheur messagesRemarque N’utilisez jamais l’entrée Phono Généralités sur les connexionsRemarque ’utilisez jamais l’entrée Phono Connexions analogiques du lecteur de CDConnexions optiques numériques de l’enregistreur de CD Mise en place des piles dans la télécommandeConseils d’installation Alimentation‹ Le type de disque s’allume sur l’afficheur Telecommande ET Mise EN Place DES DisquesFrançais Commandes à distance Mise en place des disquesPréparation pour la copie à vitesse élevée et normale EnregistrementRemarques préliminaires Copie à vitesse élevée et normaleDUBB-1 cela ne se produit pas Remarque La pause n’est pas active pendant DubbRemarque La pause n’est pas active pendant DUBB-1 Lecteur de CD externeDémarrage de l’enregistrement numérique synchronisé Démarrage de l’enregistrement numérique‹ Record clignote PréparationDémarrage de l’enregistrement analogique Enregistrement analogique depuis une source externeLa finalisation dure au moins 2 minutes Finalisation disques CD-R et CD-RWAnnulation de la finalisation disques CD-RW Dans les 3 secondes, sur RecordChangeur à 2 disques Effacement ET LectureEffacement des disques CD-RW PlatineSélection d’une plage ou recherche Lecture en mode aléatoire ShuffleLecture Effacement d’un programme ProgrammationAppuyez sur Play pour démarrer la lecture du programme Dépannage EN CAS DE ProblemesProgramme de diagnostic Datos técnicos Información GeneralEspañol CD-audio grabables CD-R Discos para grabación MantenimientoDiscos para reproducción AccesoriosEspañol Controles Y ConexionesControles del panel frontal CD recorder Conexiones del panel posteriorSección del reproductor de CD PantallaDescripción de la pantalla Español Sección de la grabadora de CDMensajes de pantalla Observación No utilice nunca la entrada Phono InstalaciónConexiones generales ConexionesanalógicasdelreproductorylagrabadoraObservación No utilice nunca la entrada Phono giradiscos ConexionesdigitalescoaxialesdelagrabadoradeCDPulse ON/OFF para encender la grabador/reproductor de CD Recomendaciones de configuraciónAlimentación Inserción de las pilas en el mando a distancia‹ La pantalla le informará sobre el tipo de disco insertado Mando a Distancia E Inserción DE DiscosÓrdenes del mando a distancia Inserción de discos Pista posterioPreparación para la copia a velocidad alta o normal GrabaciónObservaciones sobre la grabación Copia a velocidad alta y normalInicio de la copia a velocidad normal pista o programa Inicie la grabación digital sincronizada Comienzo de grabación digitalObservación Si está activada la función Auto Track Preparación para la grabación digital sincronizadaPara interrumpir momentáneamente la grabación, pulse SegundosPreparación para la grabación analógica Inicie la grabación analógicaSólo discos CD-RW GrabacionUltimación de discos CD-R y CD-RW Rehabilitación de discos CD-RWUso como cambiador de 2 discos Borrado Y ReproducciónBorrado de discos CD-RW Repetición de CD, pista o programa ReproducciónSelección de una pista o búsqueda Reproducción al azar orden aleatorioBorrado de un programa ProgramaciónPulse Play para dar comienzo a la reproducción del programa Programa de diagnóstico Detección DE ProblemasSolución de problemas 3104 125

765 specifications

The Philips 765 is an innovative and advanced television that embodies cutting-edge technology and exceptional design, making it a standout product in the competitive market of consumer electronics. This model showcases a fusion of superior picture quality, user-friendly features, and modern aesthetics, appealing to tech enthusiasts and casual viewers alike.

At the heart of the Philips 765 is its state-of-the-art OLED display, which delivers stunning visuals with incredibly deep blacks and vibrant colors. The OLED technology provides a higher contrast ratio compared to traditional LED displays, ensuring that viewers can experience a broader color spectrum and more lifelike images. The 4K resolution further enhances the viewing experience, offering crisp details and clarity that brings movies, shows, and games to life.

One of the standout features of the Philips 765 is its support for HDR (High Dynamic Range) formats including HDR10+ and Dolby Vision. This capability allows the television to adjust brightness and contrast on the fly, resulting in images that are not only brilliant in daylight but also beautifully detailed in darker scenes. The integration of Ambilight technology is another hallmark of Philips televisions, and the 765 is no exception. Ambilight creates an immersive viewing experience by projecting light from the sides of the TV, matching the on-screen content and enhancing the overall atmosphere within the room.

With a commitment to connectivity and smart features, the Philips 765 comes equipped with various connectivity options including HDMI 2.1, USB ports, and wireless connectivity. This ensures compatibility with a wide range of devices, from gaming consoles to streaming services. The TV runs on a user-friendly smart TV platform, providing access to popular streaming applications and services, making it easy for users to enjoy their favorite content.

Moreover, the Philips 765 features integrated audio technology that complements its visual prowess. With Dolby Atmos support, the TV offers an immersive audio experience, allowing viewers to feel as though they are part of the action. This combination of high-quality sound and visuals makes the Philips 765 an ideal choice for home theaters and entertainment setups.

In summary, the Philips 765 is a remarkable television that encompasses advanced OLED technology, HDR capabilities, immersive Ambilight features, and robust smart functionalities. Its exceptional design and performance make it a worthy addition to any modern living space, promising an unparalleled viewing experience.
Top Page Image Contents