Schneider Electric AP9635 manual Two fields report when you logged in, by date and time

Up Time: 0 Days 21 Hours 21 Minutes

•Two fields report when you logged in, by date and time.

Date : 03/30/2009

Time : 5:58:30

•The User field reports whether you logged in through the Administrator or Device Manager account. (The Read Only User account cannot access the command line interface.)

When you log on as Device Manager (equivalent to Device User in the Web interface), you can access the event log and view the number of active alarms.

User : Administrator

Main screen status fields.

•The Stat field reports the Management Card status.

Stat : P+ N+ A+

P+	The operating system (AOS) is functioning properly.
N+	The network is functioning properly.
N?	A BOOTP request cycle is in progress.
N–	The Management Card failed to connect to the network.
N!	Another device is using the IP address of the Management Card.
A+	The application is functioning properly.
A–	The application has a bad checksum.
A?	The application is initializing.
A!	The application is not compatible with the AOS.

If P+ is not displayed, contact APC Customer Support. See “APC Worldwide Customer Support” on page 96.

To view the status of the UPS, you must access the Web interface of the Management Card. For more information, see “Web Interface” on page 28.

Network Management Card User’s Guide 10