Schneider Electric AP9635 manual Web Interface, Introduction, Supported Web browsers

Page 37

Web Interface

Introduction

Overview

The Web interface provides options to manage the Management Card and view the status of its UPS.

See “Web” on page 59 for information on how to select, enable, and disable the protocols that control access to the Web interface and to define the Web-server ports for the protocols.

Note: All UPS settings and alarm thresholds must be configured at the user interface display of the UPS.

Supported Web browsers

You can use Microsoft® Internet Explorer® (IE) 7.x or higher (on Windows® operating systems only) or Mozilla® Firefox® 3.0.6 or higher (on all operating systems) to access the Management Card through its Web interface. Other commonly available browsers may work but have not been fully tested by American Power Conversion.

The Management Card cannot work with a proxy server. Before you can use a Web browser to access the Web interface of the Management Card, you must do one of the following:

•Configure the Web browser to disable the use of a proxy server for the Management Card.

•Configure the proxy server so that it does not proxy the specific IP address of the Management Card.

How to Log On

Overview

You can use the DNS name or System IP address of the Management Card for the URL address of the Web interface. Use your case-sensitive user name and password to log on. The default user name differs by account type:

•apc for an Administrator

•device for a Device User

•readonly for a Read-Only User

The default password is apc for all three account types.

Note: If you are using HTTPS (SSL/TLS) as your access protocol, your login credentials are compared with information in a server certificate. If the certificate was created with the Security Wizard, and an IP address was specified as the common name in the certificate, you must use an IP address to log on to the Management Card. If a DNS name was specified as the common name on the certificate, you must use a DNS name to log on.

For information about the Web page displayed when you log on, see “Home Page” on page 30.

Network Management Card User’s Guide

28

Image 37

Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Introduction FeaturesProduct Description Initial setup Internal Management FeaturesNetwork management features OverviewTypes of user accounts Access priority for logging onHow to Recover from a Lost Password Description Front PanelCondition Description Status LEDLink-RX/TX 10/100 LED Resetting the network timer Watchdog FeaturesNetwork interface watchdog mechanism How To Log On Command Line InterfaceRemote access to the command line interface Sample main screen Main ScreenInformation and status fields Two fields report when you logged in, by date and time Entering commands Using the Command Line InterfaceCommand syntax Code Error message Command Response CodesSyntax examples Alarmcount Command DescriptionsAbout Option Arguments DescriptionOption Argument Description BootDate ConsoleArgument Description DeleteDir DnsKey Description EventlogExit FormatOption Argument Definition FtpHelp ModbusNtp NetstatPing Prompt PortSpeedQuit Radius RebootSnmp, snmp3 ResetToDefSystem Tcpip6 TcpipTls Ups UioUser XferINI WebXferStatus Introduction Web InterfaceSupported Web browsers URL address formats Error Message Browser Cause of the ErrorQuick status icons HomeIcon Description Recent Device EventsTabs How to Use the Tabs, Menus, and LinksMenus Quick LinksOverview Monitor the UPS and Configure ShutdownsOperating state Operating State Icon DescriptionRecent UPS Events StatusModel-specific status displayed PowerChute Network Shutdown clients PowerChute OptionParameter Description PowerChute Network Shutdown configuration parametersAbout Option Heading Displayed Information Environmental MonitoringDetailed status and configuration Temperature and HumidityBrief status Threshold DescriptionUPS Network Management Card 2 User’s Guide Input Contacts About Output RelayConfiguring an output to respond to an event Configuring the Control PolicyConfiguring the UPS or output to respond to an input alarm Use the Event and Data Logs LogsEvent log Launch Log in New Window buttonData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Setting user access Administration SecurityAuthentication Local UsersRadius Radius Setting DefinitionSummary of the configuration procedure Configuring the Radius ServerConfiguring a Radius server on Unix with shadow passwords Supported Radius serversInactivity Timeout TCP/IP and Communication Settings Administration Network FeaturesTCP/IP settings Setting DescriptionAPC Cookie. Tag 1, Len 4, Data 1APC Dhcp response optionsPing Response DNS Port SpeedQuery Type Selected Query Question to Use Option Description WebConsole SNMPv1 SnmpSNMPv3 Modbus FTP Server Configuring event actions Administration NotificationEvent Actions Types of notificationNetwork Management Card User’s Guide Mail notification Active, Automatic, Direct NotificationIdentify up to four e-mail recipients Snmp Trap Test Snmp trapsSetting Definition Remote Monitoring ServiceSyslog Syslog Settings Path Logs Syslog settings Identification Administration General OptionsSet the Date and Time MethodDaylight saving Use an .ini FileChange the default temperature scale Event Log, Temperature Units, and Log-InSpecify a default login Color-code event log textConfigure Links Reset the Management CardAbout the Management Card Action DefinitionCapabilities, Requirements, and Installation Device IP Configuration WizardHow to use the Wizard to configure TCP/IP settings InstallationUse the Wizard Configure the basic TCP/IP settings remotelySelect Remotely over the network, and click Next Select Locally through the serial port, and click Next Configure or reconfigure the TCP/IP settings locallySummary of the procedure How to Export Configuration SettingsContents of the .ini file Detailed proceduresFtp put filename.ini Event and its error messages Upload Event and Error MessagesMessages in config.ini Errors generated by overridden valuesRelated Topics File Transfers How to Upgrade FirmwareBenefits of upgrading firmware Firmware files Network Management CardFirmware File Transfer Methods Use FTP or SCP to upgrade one Management CardHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Verify the version numbers of installed firmware Verifying Upgrades and UpdatesUse a USB drive to transfer the files Verify the success or failure of the transferAdding and Changing Language Packs Management Card Access Problems TroubleshootingProblem Solution GET Snmp IssuesAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Terms of warranty Two-Year Factory WarrantyNon-transferable warranty Exclusions Warranty claims 990-3197B-001 2011 APC Worldwide Customer Support