Schneider Electric AP9635 manual Radius, Reboot

Page 30

radius

Access: Administrator only

Description: View the existing RADIUS settings, enable or disable RADIUS authentication, and configure basic authentication parameters for up to two RADIUS servers.

For a summary of RADIUS server configuration and a list of supported RADIUS servers, see “Configuring the RADIUS Server” on page 52.

Additional authentication parameters for RADIUS servers are available at the Web interface of the Management Card. See “RADIUS” on page 51 for more information.

For detailed information about configuring your RADIUS server, see the Security Handbook, available on the Network Management Card Utility CD and at the APC Web site, www.apc.com.

Option	Argument	Description

-a	local	Configure RADIUS authentication:
	radiusLocal	• local—RADIUS is disabled. Local authentication is enabled.
	radius	• radiusLocal—RADIUS, then Local Authentication. RADIUS and local
		authentication are enabled. Authentication is requested from the RADIUS
		server first. If the RADIUS server fails to respond, local authentication is used.
		• radius—RADIUS is enabled. Local authentication is disabled.

-p1	<server IP>	The server name or IP address of the primary or secondary RADIUS server.
-p2		NOTE: RADIUS servers use port 1812 by default to authenticate users. To use a

		different port, add a colon followed by the new port number to the end of the
		RADIUS server name or IP address.

-s1	<server	The shared secret between the primary or secondary RADIUS server and the
-s2	secret>	Management Card.

-t1	<server	The time in seconds that the Management Card waits for a response from the
-t2	timeout>	primary or secondary RADIUS server.

Example 1: To view the existing RADIUS settings for the Management Card, type radius and press

ENTER.

Example 2: To enable RADIUS and local authentication, type:

radius -a radiusLocal

Example 3: To configure a 10-second timeout for a secondary RADIUS server, type:

radius -t2 10

reboot

Access: Administrator

Description: Resets the Management Card.

21	Network Management Card User’s Guide

Image 30

Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Features IntroductionProduct Description Network management features Internal Management FeaturesInitial setup OverviewAccess priority for logging on Types of user accountsHow to Recover from a Lost Password Front Panel DescriptionStatus LED Condition DescriptionLink-RX/TX 10/100 LED Watchdog Features Resetting the network timerNetwork interface watchdog mechanism Command Line Interface How To Log OnRemote access to the command line interface Main Screen Sample main screenInformation and status fields Two fields report when you logged in, by date and time Using the Command Line Interface Entering commandsCommand syntax Command Response Codes Code Error messageSyntax examples About Command DescriptionsAlarmcount Option Arguments DescriptionBoot Option Argument DescriptionConsole DateDir DeleteArgument Description DnsExit EventlogKey Description FormatHelp FtpOption Argument Definition ModbusNetstat NtpPing PortSpeed PromptQuit Reboot RadiusResetToDef Snmp, snmp3System Tcpip Tcpip6Tls Uio UpsUser Web XferINIXferStatus Web Interface IntroductionSupported Web browsers Error Message Browser Cause of the Error URL address formatsIcon Description HomeQuick status icons Recent Device EventsMenus How to Use the Tabs, Menus, and LinksTabs Quick LinksOperating state Monitor the UPS and Configure ShutdownsOverview Operating State Icon DescriptionStatus Recent UPS EventsModel-specific status displayed PowerChute Option PowerChute Network Shutdown clientsPowerChute Network Shutdown configuration parameters Parameter DescriptionAbout Option Environmental Monitoring Heading Displayed InformationBrief status Temperature and HumidityDetailed status and configuration Threshold DescriptionUPS Network Management Card 2 User’s Guide Input Contacts Output Relay AboutConfiguring the Control Policy Configuring an output to respond to an eventConfiguring the UPS or output to respond to an input alarm Event log LogsUse the Event and Data Logs Launch Log in New Window buttonData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Authentication Administration SecuritySetting user access Local UsersRadius Setting Definition RadiusConfiguring a Radius server on Unix with shadow passwords Configuring the Radius ServerSummary of the configuration procedure Supported Radius serversInactivity Timeout TCP/IP settings Administration Network FeaturesTCP/IP and Communication Settings Setting DescriptionDhcp response options APC Cookie. Tag 1, Len 4, Data 1APCPing Response Port Speed DNSQuery Type Selected Query Question to Use Web Option DescriptionConsole Snmp SNMPv1SNMPv3 Modbus FTP Server Event Actions Administration NotificationConfiguring event actions Types of notificationNetwork Management Card User’s Guide Active, Automatic, Direct Notification Mail notificationIdentify up to four e-mail recipients Snmp traps Snmp Trap TestRemote Monitoring Service Setting DefinitionSyslog Syslog Settings Path Logs Syslog settings Set the Date and Time Administration General OptionsIdentification MethodUse an .ini File Daylight savingSpecify a default login Event Log, Temperature Units, and Log-InChange the default temperature scale Color-code event log textAbout the Management Card Reset the Management CardConfigure Links Action DefinitionHow to use the Wizard to configure TCP/IP settings Device IP Configuration WizardCapabilities, Requirements, and Installation InstallationConfigure the basic TCP/IP settings remotely Use the WizardSelect Remotely over the network, and click Next Configure or reconfigure the TCP/IP settings locally Select Locally through the serial port, and click NextContents of the .ini file How to Export Configuration SettingsSummary of the procedure Detailed proceduresFtp put filename.ini Messages in config.ini Upload Event and Error MessagesEvent and its error messages Errors generated by overridden valuesRelated Topics Benefits of upgrading firmware How to Upgrade FirmwareFile Transfers Firmware files Network Management CardUse FTP or SCP to upgrade one Management Card Firmware File Transfer MethodsHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Use a USB drive to transfer the files Verifying Upgrades and UpdatesVerify the version numbers of installed firmware Verify the success or failure of the transferAdding and Changing Language Packs Troubleshooting Management Card Access ProblemsProblem Solution Snmp Issues GETAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Two-Year Factory Warranty Terms of warrantyNon-transferable warranty Exclusions Warranty claims APC Worldwide Customer Support 990-3197B-001 2011