Schneider Electric AP9635 manual Netstat, Ntp, Ping

Page 28

Option

Argument

Description

 

 

 

-sr

<scan rate in mSec>

Set the scan rate for query packets in Master mode. (MGE Galaxy

 

 

models only)

 

 

 

-rep

<# of repetitions>

Set the number of repetitions for query packets in Master mode. (MGE

 

 

Galaxy models only)

 

 

 

-ResetToDef

 

Reset the modbus settings to their default values.

 

 

 

netstat

Access: Administrator, Device User

Description: View the status of the network and all active IPv4 and IPv6 addresses.

ntp

Access: Administrator

Description: View and configure the network time protocol parameters.

Option

Argument

Definition

 

 

 

-OM

enable disable

Override the manual settings.

 

 

 

-p

<primary NTP server>

Specify the primary server.

 

 

 

-s

<secondary NTP server>

Specify the secondary server.

 

 

 

Example 1: To enable the override of manual setting, type:

ntp -OM enable

Example 2: To specify the primary NTP server, type:

ntp -p 150.250.6.10

ping

Access: Administrator, Device User

Description: Determine whether the device with the IP address or DNS name you specify is connected to the network. Four inquiries are sent to the address.

Argument

Description

 

 

<IP address or DNS name>

Type an IP address with the format xxx.xxx.xxx.xxx, or the DNS

 

name configured by the DNS server.

 

 

Example: To determine whether a device with an IP address of 150.250.6.10 is connected to the network, type:

ping 150.250.6.10

19

Network Management Card User’s Guide

Image 28
Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Introduction FeaturesProduct Description Internal Management Features Initial setupNetwork management features OverviewAccess priority for logging on Types of user accountsHow to Recover from a Lost Password Front Panel DescriptionCondition Description Status LEDLink-RX/TX 10/100 LED Resetting the network timer Watchdog FeaturesNetwork interface watchdog mechanism How To Log On Command Line InterfaceRemote access to the command line interface Sample main screen Main ScreenInformation and status fields Two fields report when you logged in, by date and time Entering commands Using the Command Line InterfaceCommand syntax Code Error message Command Response CodesSyntax examples Command Descriptions AlarmcountAbout Option Arguments DescriptionBoot Option Argument DescriptionConsole DateDelete Argument DescriptionDir DnsEventlog Key DescriptionExit FormatFtp Option Argument DefinitionHelp ModbusNtp NetstatPing Prompt PortSpeedQuit Reboot RadiusSnmp, snmp3 ResetToDefSystem Tcpip Tcpip6Tls Uio UpsUser XferINI WebXferStatus Introduction Web InterfaceSupported Web browsers Error Message Browser Cause of the Error URL address formatsHome Quick status iconsIcon Description Recent Device EventsHow to Use the Tabs, Menus, and Links TabsMenus Quick LinksMonitor the UPS and Configure Shutdowns OverviewOperating state Operating State Icon DescriptionRecent UPS Events StatusModel-specific status displayed PowerChute Option PowerChute Network Shutdown clientsPowerChute Network Shutdown configuration parameters Parameter DescriptionAbout Option Environmental Monitoring Heading Displayed InformationTemperature and Humidity Detailed status and configurationBrief status Threshold DescriptionUPS Network Management Card 2 User’s Guide Input Contacts Output Relay AboutConfiguring an output to respond to an event Configuring the Control PolicyConfiguring the UPS or output to respond to an input alarm Logs Use the Event and Data LogsEvent log Launch Log in New Window buttonData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Administration Security Setting user accessAuthentication Local UsersRadius Setting Definition RadiusConfiguring the Radius Server Summary of the configuration procedureConfiguring a Radius server on Unix with shadow passwords Supported Radius serversInactivity Timeout Administration Network Features TCP/IP and Communication SettingsTCP/IP settings Setting DescriptionDhcp response options APC Cookie. Tag 1, Len 4, Data 1APCPing Response Port Speed DNSQuery Type Selected Query Question to Use Web Option DescriptionConsole Snmp SNMPv1SNMPv3 Modbus FTP Server Administration Notification Configuring event actionsEvent Actions Types of notificationNetwork Management Card User’s Guide Active, Automatic, Direct Notification Mail notificationIdentify up to four e-mail recipients Snmp traps Snmp Trap TestSetting Definition Remote Monitoring ServiceSyslog Syslog Settings Path Logs Syslog settings Administration General Options IdentificationSet the Date and Time MethodUse an .ini File Daylight savingEvent Log, Temperature Units, and Log-In Change the default temperature scaleSpecify a default login Color-code event log textReset the Management Card Configure LinksAbout the Management Card Action DefinitionDevice IP Configuration Wizard Capabilities, Requirements, and InstallationHow to use the Wizard to configure TCP/IP settings InstallationUse the Wizard Configure the basic TCP/IP settings remotelySelect Remotely over the network, and click Next Configure or reconfigure the TCP/IP settings locally Select Locally through the serial port, and click NextHow to Export Configuration Settings Summary of the procedureContents of the .ini file Detailed proceduresFtp put filename.ini Upload Event and Error Messages Event and its error messagesMessages in config.ini Errors generated by overridden valuesRelated Topics How to Upgrade Firmware File TransfersBenefits of upgrading firmware Firmware files Network Management CardUse FTP or SCP to upgrade one Management Card Firmware File Transfer MethodsHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Verifying Upgrades and Updates Verify the version numbers of installed firmwareUse a USB drive to transfer the files Verify the success or failure of the transferAdding and Changing Language Packs Management Card Access Problems TroubleshootingProblem Solution Snmp Issues GETAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Terms of warranty Two-Year Factory WarrantyNon-transferable warranty Exclusions Warranty claims APC Worldwide Customer Support 990-3197B-001 2011