Schneider Electric AP9635 manual Configure or reconfigure the TCP/IP settings locally

Page 87

Configure or reconfigure the TCP/IP settings locally

1.Contact your network administrator to obtain valid TCP/IP settings.

2.Connect the provided serial configuration cable (part number 940-0299) from an available communications port on your computer to the serial port of the card or device. Make sure no other application is using the computer port.

3.From the Start menu, launch the Wizard application.

4.If the Network Management Card or network-enabled device is not configured, wait for the Wizard to detect it. Otherwise, click Next>.

5.Select Locally (through the serial port), and click Next >.

6.Enter the system IP, subnet mask, and default gateway for the Management Card or device, and click Next >.

7.On the Transmit Current Settings Remotely screen, if you select Start a Web browser when finished, the default Web browser connects to the Management Card or device after the Wizard transmits the settings.

8.Click Finish to transmit the TCP/IP settings. If the IP address you entered is in use on the network, the Wizard prompts you to enter an IP address that is not in use. Enter a valid IP address, and click Finish.

9.If you selected Start a Web browser when finished in step 7, you can now configure other parameters through the Web interface of the card or device.

Network Management Card User’s Guide

78

Image 87

Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Features IntroductionProduct Description Overview Internal Management FeaturesInitial setup Network management featuresTypes of user accounts Access priority for logging onHow to Recover from a Lost Password Description Front PanelStatus LED Condition DescriptionLink-RX/TX 10/100 LED Watchdog Features Resetting the network timerNetwork interface watchdog mechanism Command Line Interface How To Log OnRemote access to the command line interface Main Screen Sample main screenInformation and status fields Two fields report when you logged in, by date and time Using the Command Line Interface Entering commandsCommand syntax Command Response Codes Code Error messageSyntax examples Option Arguments Description Command DescriptionsAlarmcount AboutOption Argument Description BootDate ConsoleDns DeleteArgument Description DirFormat EventlogKey Description ExitModbus FtpOption Argument Definition HelpNetstat NtpPing PortSpeed PromptQuit Radius RebootResetToDef Snmp, snmp3System Tcpip6 TcpipTls Ups UioUser Web XferINIXferStatus Web Interface IntroductionSupported Web browsers URL address formats Error Message Browser Cause of the ErrorRecent Device Events HomeQuick status icons Icon DescriptionQuick Links How to Use the Tabs, Menus, and LinksTabs MenusOperating State Icon Description Monitor the UPS and Configure ShutdownsOverview Operating stateStatus Recent UPS EventsModel-specific status displayed PowerChute Network Shutdown clients PowerChute OptionParameter Description PowerChute Network Shutdown configuration parametersAbout Option Heading Displayed Information Environmental MonitoringThreshold Description Temperature and HumidityDetailed status and configuration Brief statusUPS Network Management Card 2 User’s Guide Input Contacts About Output RelayConfiguring the Control Policy Configuring an output to respond to an eventConfiguring the UPS or output to respond to an input alarm Launch Log in New Window button LogsUse the Event and Data Logs Event logData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Local Users Administration SecuritySetting user access AuthenticationRadius Radius Setting DefinitionSupported Radius servers Configuring the Radius ServerSummary of the configuration procedure Configuring a Radius server on Unix with shadow passwordsInactivity Timeout Setting Description Administration Network FeaturesTCP/IP and Communication Settings TCP/IP settingsAPC Cookie. Tag 1, Len 4, Data 1APC Dhcp response optionsPing Response DNS Port SpeedQuery Type Selected Query Question to Use Option Description WebConsole SNMPv1 SnmpSNMPv3 Modbus FTP Server Types of notification Administration NotificationConfiguring event actions Event ActionsNetwork Management Card User’s Guide Mail notification Active, Automatic, Direct NotificationIdentify up to four e-mail recipients Snmp Trap Test Snmp trapsRemote Monitoring Service Setting DefinitionSyslog Syslog Settings Path Logs Syslog settings Method Administration General OptionsIdentification Set the Date and TimeDaylight saving Use an .ini FileColor-code event log text Event Log, Temperature Units, and Log-InChange the default temperature scale Specify a default loginAction Definition Reset the Management CardConfigure Links About the Management CardInstallation Device IP Configuration WizardCapabilities, Requirements, and Installation How to use the Wizard to configure TCP/IP settingsConfigure the basic TCP/IP settings remotely Use the WizardSelect Remotely over the network, and click Next Select Locally through the serial port, and click Next Configure or reconfigure the TCP/IP settings locallyDetailed procedures How to Export Configuration SettingsSummary of the procedure Contents of the .ini fileFtp put filename.ini Errors generated by overridden values Upload Event and Error MessagesEvent and its error messages Messages in config.iniRelated Topics Firmware files Network Management Card How to Upgrade FirmwareFile Transfers Benefits of upgrading firmwareFirmware File Transfer Methods Use FTP or SCP to upgrade one Management CardHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Verify the success or failure of the transfer Verifying Upgrades and UpdatesVerify the version numbers of installed firmware Use a USB drive to transfer the filesAdding and Changing Language Packs Troubleshooting Management Card Access ProblemsProblem Solution GET Snmp IssuesAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Two-Year Factory Warranty Terms of warrantyNon-transferable warranty Exclusions Warranty claims 990-3197B-001 2011 APC Worldwide Customer Support