Schneider Electric AP9635 manual Internal Management Features, Initial setup, Overview

Page 11

Initial setup

You must define three TCP/IP settings for the Network Management Card before it can operate on the network:

•IP address of the Management Card

•Subnet mask

•IP address of the default gateway

Caution: Do not use the loopback address (127.0.0.1) as the default gateway. Doing so disables the card. You must then log on using a serial connection and reset TCP/IP settings to their defaults.

To configure the TCP/IP settings, see the Network Management Card Installation Manual, available on the Network Management Card Utility CD and in printed form.

For detailed information on how to use a DHCP server to configure the TCP/IP settings at a Management Card, see “TCP/IP and Communication Settings” on page 54.

Network management features

These applications and utilities work with a UPS that connects to the network through a Network Management Card.

•PowerChute Network Shutdown—Provide unattended remote graceful shutdown of computers that are connected to American Power Conversion UPS devices.

•PowerNet® Management Information Base (MIB) with a standard MIB browser—Perform SNMP SETs and GETs and to use SNMP traps.

•InfraStruxure Central—Provide enterprise-level power management and management of Amercian Power Conversion agents, UPS devices, and environmental monitors.

•Device IP Configuration Wizard—Configure the basic settings of one or more Network Management Cards over the network.

•Security Wizard—Create components needed for high security for the Network Management Card when you are using Secure Sockets Layer (SSL) and related protocols and encryption routines.

Internal Management Features

Overview

Use the Web interface or the command line interface to view the status of the UPS and manage the Management Card.

For more information about the internal user interfaces, see “Web Interface” on page 28 and “Command Line Interface” on page 8.

Network Management Card User’s Guide

2

Image 11

Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Product Description FeaturesIntroduction Overview Internal Management FeaturesInitial setup Network management featuresTypes of user accounts Access priority for logging onHow to Recover from a Lost Password Description Front PanelLink-RX/TX 10/100 LED Status LEDCondition Description Network interface watchdog mechanism Watchdog FeaturesResetting the network timer Remote access to the command line interface Command Line InterfaceHow To Log On Information and status fields Main ScreenSample main screen Two fields report when you logged in, by date and time Command syntax Using the Command Line InterfaceEntering commands Syntax examples Command Response CodesCode Error message Option Arguments Description Command DescriptionsAlarmcount AboutOption Argument Description BootDate ConsoleDns DeleteArgument Description DirFormat EventlogKey Description ExitModbus FtpOption Argument Definition HelpPing NetstatNtp Quit PortSpeedPrompt Radius RebootSystem ResetToDefSnmp, snmp3 Tcpip6 TcpipTls Ups UioUser XferStatus WebXferINI Supported Web browsers Web InterfaceIntroduction URL address formats Error Message Browser Cause of the ErrorRecent Device Events HomeQuick status icons Icon DescriptionQuick Links How to Use the Tabs, Menus, and LinksTabs MenusOperating State Icon Description Monitor the UPS and Configure ShutdownsOverview Operating stateModel-specific status displayed StatusRecent UPS Events PowerChute Network Shutdown clients PowerChute OptionParameter Description PowerChute Network Shutdown configuration parametersAbout Option Heading Displayed Information Environmental MonitoringThreshold Description Temperature and HumidityDetailed status and configuration Brief statusUPS Network Management Card 2 User’s Guide Input Contacts About Output RelayConfiguring the UPS or output to respond to an input alarm Configuring the Control PolicyConfiguring an output to respond to an event Launch Log in New Window button LogsUse the Event and Data Logs Event logData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Local Users Administration SecuritySetting user access AuthenticationRadius Radius Setting DefinitionSupported Radius servers Configuring the Radius ServerSummary of the configuration procedure Configuring a Radius server on Unix with shadow passwordsInactivity Timeout Setting Description Administration Network FeaturesTCP/IP and Communication Settings TCP/IP settingsAPC Cookie. Tag 1, Len 4, Data 1APC Dhcp response optionsPing Response DNS Port SpeedQuery Type Selected Query Question to Use Option Description WebConsole SNMPv1 SnmpSNMPv3 Modbus FTP Server Types of notification Administration NotificationConfiguring event actions Event ActionsNetwork Management Card User’s Guide Mail notification Active, Automatic, Direct NotificationIdentify up to four e-mail recipients Snmp Trap Test Snmp trapsSyslog Remote Monitoring ServiceSetting Definition Syslog Settings Path Logs Syslog settings Method Administration General OptionsIdentification Set the Date and TimeDaylight saving Use an .ini FileColor-code event log text Event Log, Temperature Units, and Log-InChange the default temperature scale Specify a default loginAction Definition Reset the Management CardConfigure Links About the Management CardInstallation Device IP Configuration WizardCapabilities, Requirements, and Installation How to use the Wizard to configure TCP/IP settingsSelect Remotely over the network, and click Next Configure the basic TCP/IP settings remotelyUse the Wizard Select Locally through the serial port, and click Next Configure or reconfigure the TCP/IP settings locallyDetailed procedures How to Export Configuration SettingsSummary of the procedure Contents of the .ini fileFtp put filename.ini Errors generated by overridden values Upload Event and Error MessagesEvent and its error messages Messages in config.iniRelated Topics Firmware files Network Management Card How to Upgrade FirmwareFile Transfers Benefits of upgrading firmwareFirmware File Transfer Methods Use FTP or SCP to upgrade one Management CardHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Verify the success or failure of the transfer Verifying Upgrades and UpdatesVerify the version numbers of installed firmware Use a USB drive to transfer the filesAdding and Changing Language Packs Problem Solution TroubleshootingManagement Card Access Problems GET Snmp IssuesAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Non-transferable warranty Exclusions Two-Year Factory WarrantyTerms of warranty Warranty claims 990-3197B-001 2011 APC Worldwide Customer Support