Schneider Electric AP9635 Verifying Upgrades and Updates, Use a USB drive to transfer the files

Page 96

Use a USB drive to transfer the files

Note: Before starting the transfer, make sure the USB drive is formatted in FAT32.

1.Download the update files and unzip them.

2.Create a folder named apcfirm on the USB drive.

3.Place the extracted files in the apcfirm directory.

4.Insert the USB drive into any USB port on the Network Management Card 2.

5.Reset the Network Management Card 2 and wait for the card to reboot fully.

6.Check that the upgrade was completed successfully using the procedures in “Verifying Upgrades and Updates” on page 87.

Verifying Upgrades and Updates

Verify the success or failure of the transfer

To verify whether a firmware upgrade succeeded, use the xferStatus command in the command line interface to view the last transfer result, or use an SNMP GET to the mfiletransferStatusLastTransferResult OID.

Last Transfer Result codes

Code	Description

Successful	The file transfer was successful.

Result not available	There are no recorded file transfers.

Failure unknown	The last file transfer failed for an unknown reason.

Server inaccessible	The TFTP or FTP server could not be found on the network.

Server access denied	The TFTP or FTP server denied access.

File not found	The TFTP or FTP server could not locate the requested file.

File type unknown	The file was downloaded but the contents were not recognized.

File corrupt	The file was downloaded but at least one Cyclical Redundancy Check (CRC) failed.

Verify the version numbers of installed firmware.

Use the Web interface to verify the versions of the upgraded firmware modules by selecting the Administration tab, General on the top menu bar, and About on the left navigation menu, or use an SNMP GET to the MIB II sysDescr OID. In the command line interface, use the about command.

87	Network Management Card User’s Guide

Image 96

Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Features IntroductionProduct Description Internal Management Features Initial setupNetwork management features OverviewAccess priority for logging on Types of user accountsHow to Recover from a Lost Password Front Panel DescriptionStatus LED Condition DescriptionLink-RX/TX 10/100 LED Watchdog Features Resetting the network timerNetwork interface watchdog mechanism Command Line Interface How To Log OnRemote access to the command line interface Main Screen Sample main screenInformation and status fields Two fields report when you logged in, by date and time Using the Command Line Interface Entering commandsCommand syntax Command Response Codes Code Error messageSyntax examples Command Descriptions AlarmcountAbout Option Arguments DescriptionBoot Option Argument DescriptionConsole DateDelete Argument DescriptionDir DnsEventlog Key DescriptionExit FormatFtp Option Argument DefinitionHelp ModbusNetstat NtpPing PortSpeed PromptQuit Reboot RadiusResetToDef Snmp, snmp3System Tcpip Tcpip6Tls Uio UpsUser Web XferINIXferStatus Web Interface IntroductionSupported Web browsers Error Message Browser Cause of the Error URL address formatsHome Quick status iconsIcon Description Recent Device EventsHow to Use the Tabs, Menus, and Links TabsMenus Quick LinksMonitor the UPS and Configure Shutdowns OverviewOperating state Operating State Icon DescriptionStatus Recent UPS EventsModel-specific status displayed PowerChute Option PowerChute Network Shutdown clientsPowerChute Network Shutdown configuration parameters Parameter DescriptionAbout Option Environmental Monitoring Heading Displayed InformationTemperature and Humidity Detailed status and configurationBrief status Threshold DescriptionUPS Network Management Card 2 User’s Guide Input Contacts Output Relay AboutConfiguring the Control Policy Configuring an output to respond to an eventConfiguring the UPS or output to respond to an input alarm Logs Use the Event and Data LogsEvent log Launch Log in New Window buttonData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Administration Security Setting user accessAuthentication Local UsersRadius Setting Definition RadiusConfiguring the Radius Server Summary of the configuration procedureConfiguring a Radius server on Unix with shadow passwords Supported Radius serversInactivity Timeout Administration Network Features TCP/IP and Communication SettingsTCP/IP settings Setting DescriptionDhcp response options APC Cookie. Tag 1, Len 4, Data 1APCPing Response Port Speed DNSQuery Type Selected Query Question to Use Web Option DescriptionConsole Snmp SNMPv1SNMPv3 Modbus FTP Server Administration Notification Configuring event actionsEvent Actions Types of notificationNetwork Management Card User’s Guide Active, Automatic, Direct Notification Mail notificationIdentify up to four e-mail recipients Snmp traps Snmp Trap TestRemote Monitoring Service Setting DefinitionSyslog Syslog Settings Path Logs Syslog settings Administration General Options IdentificationSet the Date and Time MethodUse an .ini File Daylight savingEvent Log, Temperature Units, and Log-In Change the default temperature scaleSpecify a default login Color-code event log textReset the Management Card Configure LinksAbout the Management Card Action DefinitionDevice IP Configuration Wizard Capabilities, Requirements, and InstallationHow to use the Wizard to configure TCP/IP settings InstallationConfigure the basic TCP/IP settings remotely Use the WizardSelect Remotely over the network, and click Next Configure or reconfigure the TCP/IP settings locally Select Locally through the serial port, and click NextHow to Export Configuration Settings Summary of the procedureContents of the .ini file Detailed proceduresFtp put filename.ini Upload Event and Error Messages Event and its error messagesMessages in config.ini Errors generated by overridden valuesRelated Topics How to Upgrade Firmware File TransfersBenefits of upgrading firmware Firmware files Network Management CardUse FTP or SCP to upgrade one Management Card Firmware File Transfer MethodsHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Verifying Upgrades and Updates Verify the version numbers of installed firmwareUse a USB drive to transfer the files Verify the success or failure of the transferAdding and Changing Language Packs Troubleshooting Management Card Access ProblemsProblem Solution Snmp Issues GETAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Two-Year Factory Warranty Terms of warrantyNon-transferable warranty Exclusions Warranty claims APC Worldwide Customer Support 990-3197B-001 2011