Schneider Electric AP9635 Event Log, Temperature Units, and Log-In, Color-code event log text

Page 83

Event Log, Temperature Units, and Log-In Page

Path: Administration > General > Preferences

Color-code event log text

This option is disabled by default. Select the Event Log Color Coding check box to enable color-coding of alarm text recorded in the event log. System-event entries and configuration-change entries do not change color.

Text Color

Alarm Severity

 

 

Red

Critical: A critical alarm exists, which requires immediate action.

 

 

Orange

Warning: An alarm condition requires attention and could jeopardize your data or equipment if

 

its cause is not addressed.

 

 

Green

Alarm Cleared: The conditions that caused the alarm have improved.

 

 

Black

Normal: No alarms are present. The Network Management Card and all connected devices are

 

operating normally.

 

 

Change the default temperature scale

Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature measurements in this user interface.

Specify the UI language

You can specify the default language for the user interface with the Language field. This can be set when you log on also. From the drop-down box, select one of the languages displayed.

Note: You can also specify different languages for e-mail recipients and SNMP trap receivers. See “E-mail recipients” on page 75 and “Trap Receivers” on page 76.

Specify a default login page

Configure the Web page that will display by default when any user logs in.

Network Management Card User’s Guide

74

Image 83
Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Product Description FeaturesIntroduction Overview Internal Management FeaturesInitial setup Network management featuresTypes of user accounts Access priority for logging onHow to Recover from a Lost Password Description Front PanelLink-RX/TX 10/100 LED Status LEDCondition Description Network interface watchdog mechanism Watchdog FeaturesResetting the network timer Remote access to the command line interface Command Line InterfaceHow To Log On Information and status fields Main ScreenSample main screen Two fields report when you logged in, by date and time Command syntax Using the Command Line InterfaceEntering commands Syntax examples Command Response CodesCode Error message Option Arguments Description Command DescriptionsAlarmcount AboutOption Argument Description BootDate ConsoleDns DeleteArgument Description DirFormat EventlogKey Description ExitModbus FtpOption Argument Definition HelpPing NetstatNtp Quit PortSpeedPrompt Radius RebootSystem ResetToDefSnmp, snmp3 Tcpip6 TcpipTls Ups UioUser XferStatus WebXferINI Supported Web browsers Web InterfaceIntroduction URL address formats Error Message Browser Cause of the ErrorRecent Device Events HomeQuick status icons Icon DescriptionQuick Links How to Use the Tabs, Menus, and LinksTabs MenusOperating State Icon Description Monitor the UPS and Configure ShutdownsOverview Operating stateModel-specific status displayed StatusRecent UPS Events PowerChute Network Shutdown clients PowerChute OptionParameter Description PowerChute Network Shutdown configuration parametersAbout Option Heading Displayed Information Environmental MonitoringThreshold Description Temperature and HumidityDetailed status and configuration Brief statusUPS Network Management Card 2 User’s Guide Input Contacts About Output RelayConfiguring the UPS or output to respond to an input alarm Configuring the Control PolicyConfiguring an output to respond to an event Launch Log in New Window button LogsUse the Event and Data Logs Event logData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Local Users Administration SecuritySetting user access AuthenticationRadius Radius Setting DefinitionSupported Radius servers Configuring the Radius ServerSummary of the configuration procedure Configuring a Radius server on Unix with shadow passwordsInactivity Timeout Setting Description Administration Network FeaturesTCP/IP and Communication Settings TCP/IP settingsAPC Cookie. Tag 1, Len 4, Data 1APC Dhcp response optionsPing Response DNS Port SpeedQuery Type Selected Query Question to Use Option Description WebConsole SNMPv1 SnmpSNMPv3 Modbus FTP Server Types of notification Administration NotificationConfiguring event actions Event ActionsNetwork Management Card User’s Guide Mail notification Active, Automatic, Direct NotificationIdentify up to four e-mail recipients Snmp Trap Test Snmp trapsSyslog Remote Monitoring ServiceSetting Definition Syslog Settings Path Logs Syslog settings Method Administration General OptionsIdentification Set the Date and TimeDaylight saving Use an .ini FileColor-code event log text Event Log, Temperature Units, and Log-InChange the default temperature scale Specify a default loginAction Definition Reset the Management CardConfigure Links About the Management CardInstallation Device IP Configuration WizardCapabilities, Requirements, and Installation How to use the Wizard to configure TCP/IP settingsSelect Remotely over the network, and click Next Configure the basic TCP/IP settings remotelyUse the Wizard Select Locally through the serial port, and click Next Configure or reconfigure the TCP/IP settings locallyDetailed procedures How to Export Configuration SettingsSummary of the procedure Contents of the .ini fileFtp put filename.ini Errors generated by overridden values Upload Event and Error MessagesEvent and its error messages Messages in config.iniRelated Topics Firmware files Network Management Card How to Upgrade FirmwareFile Transfers Benefits of upgrading firmwareFirmware File Transfer Methods Use FTP or SCP to upgrade one Management CardHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Verify the success or failure of the transfer Verifying Upgrades and UpdatesVerify the version numbers of installed firmware Use a USB drive to transfer the filesAdding and Changing Language Packs Problem Solution TroubleshootingManagement Card Access Problems GET Snmp IssuesAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Non-transferable warranty Exclusions Two-Year Factory WarrantyTerms of warranty Warranty claims 990-3197B-001 2011 APC Worldwide Customer Support