Schneider Electric AP9635 manual Output Relay, About

Page 50

Output Relay Page

This option is only available for devices with installed Dry Contact I/O Accessories. Select the Environment tab, then Universal I/O from the top menu bar. Click Output Relay to display the status of the output relay and configure its values.

Parameter	Description

Name	A name for this output relay. Maximum: 20 characters.

Location	The location of this output relay. Maximum: 20 characters.

Alarm Status	Normal if this output relay is not reporting an alarm, or the severity of the alarm if this
	output relay is reporting an alarm.

State	The current state of this output relay: Closed or Open.

Normal State	The normal (non-alarm) state of this output relay: Closed or Open.

Control	To change the current state of this output relay, check-mark the setting.

Delay	The number of seconds a selected alarm condition must exist before the output relay is
	activated. Use this setting to avoid activating an alarm for brief transient conditions.
	NOTE: Even if additional mapped alarms occur after the delay begins, the delay does not
	restart but continues until the output relay is activated.

Hold	The minimum number of seconds the output relay remains activated after the alarm occurs.
	Even if the activating alarm condition is corrected, the output relay remains activated until
	this time period expires.

About Page

Click About on the left navigation menu of the top menu bar option Environment to display what environmental monitoring devices are in use with this UPS and their firmware versions.

41	UPS Network Management Card 2 User’s Guide

Image 50

Contents User’s Guide 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Web Interface Monitor the UPS and Configure Shutdowns Logs Administration Notification Troubleshooting Appendix a List of Supported Commands Product Description FeaturesIntroduction Network management features Internal Management FeaturesInitial setup OverviewAccess priority for logging on Types of user accountsHow to Recover from a Lost Password Front Panel DescriptionLink-RX/TX 10/100 LED Status LEDCondition Description Network interface watchdog mechanism Watchdog FeaturesResetting the network timer Remote access to the command line interface Command Line InterfaceHow To Log On Information and status fields Main ScreenSample main screen Two fields report when you logged in, by date and time Command syntax Using the Command Line InterfaceEntering commands Syntax examples Command Response CodesCode Error message About Command DescriptionsAlarmcount Option Arguments DescriptionBoot Option Argument DescriptionConsole DateDir DeleteArgument Description DnsExit EventlogKey Description FormatHelp FtpOption Argument Definition ModbusPing NetstatNtp Quit PortSpeedPrompt Reboot RadiusSystem ResetToDefSnmp, snmp3 Tcpip Tcpip6Tls Uio UpsUser XferStatus WebXferINI Supported Web browsers Web InterfaceIntroduction Error Message Browser Cause of the Error URL address formatsIcon Description HomeQuick status icons Recent Device EventsMenus How to Use the Tabs, Menus, and LinksTabs Quick LinksOperating state Monitor the UPS and Configure ShutdownsOverview Operating State Icon DescriptionModel-specific status displayed StatusRecent UPS Events PowerChute Option PowerChute Network Shutdown clientsPowerChute Network Shutdown configuration parameters Parameter DescriptionAbout Option Environmental Monitoring Heading Displayed InformationBrief status Temperature and HumidityDetailed status and configuration Threshold DescriptionUPS Network Management Card 2 User’s Guide Input Contacts Output Relay AboutConfiguring the UPS or output to respond to an input alarm Configuring the Control PolicyConfiguring an output to respond to an event Event log LogsUse the Event and Data Logs Launch Log in New Window buttonData log To display the data log Logs Data log To set the data collection interval Logs Data interval How to use FTP or SCP to retrieve log files Scp username@hostnameoripaddressevent.csv ./event.csv Syslog servers Authentication Administration SecuritySetting user access Local UsersRadius Setting Definition RadiusConfiguring a Radius server on Unix with shadow passwords Configuring the Radius ServerSummary of the configuration procedure Supported Radius serversInactivity Timeout TCP/IP settings Administration Network FeaturesTCP/IP and Communication Settings Setting DescriptionDhcp response options APC Cookie. Tag 1, Len 4, Data 1APCPing Response Port Speed DNSQuery Type Selected Query Question to Use Web Option DescriptionConsole Snmp SNMPv1SNMPv3 Modbus FTP Server Event Actions Administration NotificationConfiguring event actions Types of notificationNetwork Management Card User’s Guide Active, Automatic, Direct Notification Mail notificationIdentify up to four e-mail recipients Snmp traps Snmp Trap TestSyslog Remote Monitoring ServiceSetting Definition Syslog Settings Path Logs Syslog settings Set the Date and Time Administration General OptionsIdentification MethodUse an .ini File Daylight savingSpecify a default login Event Log, Temperature Units, and Log-InChange the default temperature scale Color-code event log textAbout the Management Card Reset the Management CardConfigure Links Action DefinitionHow to use the Wizard to configure TCP/IP settings Device IP Configuration WizardCapabilities, Requirements, and Installation InstallationSelect Remotely over the network, and click Next Configure the basic TCP/IP settings remotelyUse the Wizard Configure or reconfigure the TCP/IP settings locally Select Locally through the serial port, and click NextContents of the .ini file How to Export Configuration SettingsSummary of the procedure Detailed proceduresFtp put filename.ini Messages in config.ini Upload Event and Error MessagesEvent and its error messages Errors generated by overridden valuesRelated Topics Benefits of upgrading firmware How to Upgrade FirmwareFile Transfers Firmware files Network Management CardUse FTP or SCP to upgrade one Management Card Firmware File Transfer MethodsHow to upgrade multiple Management Cards Use Xmodem to upgrade one Management Card Use a USB drive to transfer the files Verifying Upgrades and UpdatesVerify the version numbers of installed firmware Verify the success or failure of the transferAdding and Changing Language Packs Problem Solution TroubleshootingManagement Card Access Problems Snmp Issues GETAppendix a List of Supported Commands Network Management Card User’s Guide Network Management Card User’s Guide Non-transferable warranty Exclusions Two-Year Factory WarrantyTerms of warranty Warranty claims APC Worldwide Customer Support 990-3197B-001 2011