Schneider Electric AP9635 manual Environmental Monitoring, Heading Displayed Information

Environmental Monitoring

Note: If you install a Dry Contact I/O Accessory, AP9810, at your Network Management Card, the Environment tab displays two top menu bar options, Universal I/O and Environment. Except where noted, the settings described in this chapter are available for both options.

Overview Page

The Overview page lists the status of environmental monitoring devices associated with the AP9635 Network Management Card on a Symmetra-series or MGE Galaxy UPS.

Note: The AP9635 can only have one universal sensor attached at a time. Depending on which sensor is attached, a subset of the following headings will be displayed.

Heading	Displayed Information
Temperature	Lists all sensors and, for each sensor, the alarm status, temperature currently recorded, and
and Humidity	humidity (if supported) currently recorded. For detailed status or to reconfigure a sensor's
	parameters, click the sensor's name.
Input Contacts	Lists each enabled input contact and its alarm status and current state (open or closed). For
	detailed status of an enabled input contact or to reconfigure that contact's parameters, click
	the name of the contact.
	Note: To view or configure the parameters of a disabled contact, or to enable it, you must
	access the interface page for that contact through Input Contacts on the left navigation
	menu
Output Relay	Lists the alarm status and the current state (open or closed) of the output relay of the
	integrated Environmental Monitor. For detailed status of that output relay or to reconfigure
	its parameters, click its name.
Recent	The Recent Environmental Events field lists, in reverse chronological order, the most
Environmental	recent environmental events. To view the entire event log, click More Events at the lower
Events	right.

37 UPS Network Management Card 2 User’s Guide