Sharp MX-FX13 appendix 104, Date & Time SET, Auto Summer Time Setting, Disable FAX Print Hold

SYSTEM SETTINGS

3 Enter an account name (up to 18 characters long) and press the [OK] key.

•See "ENTERING CHARACTERS" (page 86) for the procedure for entering letters.

•If you do not wish to change the account name, press the [OK] key.

•Press the [OK] key. You will return to the screen of step 2. To change another number, repeat steps 2 and 3. To exit, press the [BACK] key in step 2.

DATE & TIME SET

This setting is used to set the machine's internal clock to the current date and time.

1	Follow steps 1 through 6 of "INITIAL
	PROCEDURE" (page 98).
2	Select "INITIAL SETTING" with the [		] or
	[	] key and then press the [OK] key.
3	Select "DATE & TIME SET" with the [		]or
	[	] key and then press the [OK] key.
4	Enter the year (2011 to 2062), month (01 to
	12), and day (01 to 31) with the numeric

keys, and then press the [OK] key.

•For the year, enter the last two digits of the year.

•The range of days that can be entered for the selected month is displayed.

5 Enter the time in 24-hour format with the numeric keys and press the [OK] key.

Enter a number from 00 to 23 for the hour and a number from 00 to 59 for the minute.

If you make a mistake in step 4 or 5, move Note the cursor to the mistake with the [ ] or

[ ] key and then enter the correct digit.

AUTO SUMMER TIME SETTING

Turn on this setting to have the internal clock automatically move forward and backward at the beginning and end of Summer Time.

The last Sunday in May: 1:00 A.M. 2:00 A.M.*

The last Sunday in October: 1:00 A.M. 0:00 A.M.* * Varies depending on country and region.

1 Follow steps 1 through 6 of "INITIAL PROCEDURE" (page 98).

2 Select "INITIAL SETTING" with the [ ] or [ ] key and then press the [OK] key.

3 Select "AUTO SUMMER TIME SETTING" with the [ ] or [ ] key and then press the [OK] key.

•The setting is turned on and a checkmark appears in the checkbox.

•If this procedure is performed when the setting is turned on, the checkmark is cleared and the setting turned off.

DISABLE FAX PRINT HOLD

This setting is used to disable the fax print hold function, which holds received faxes in memory instead of printing them as they are received. (Page 29) Normally the fax print hold function is disabled.

1 Follow steps 1 through 6 of "INITIAL PROCEDURE" (page 98).

2 Select "INITIAL SETTING" with the [ ] or [ ] key and press the [OK] key.

3 Select "DISABLE FAX PRINT HOLD" with the [ ] or [ ] key and press the [OK] key.

•The setting (which disables fax print hold) is enabled and a checkmark appears in the checkbox.

•If this procedure is performed when the setting is enabled, the checkmark will be cleared and the setting disabled (fax print hold is enabled).

104