Sharp MX-FX13 appendix Resolution Standard, Super Fine

SELECTING RESOLUTION AND EXPOSURE SETTINGS

The resolution and exposure can be adjusted to match the size and darkness of text on the original, or for an original such as a photograph. To change the settings, follow the steps below after selecting fax mode and placing the original. (Page 12)

1 Press the [RESOLUTION] key.

3 Press the [OK] key.

COPY EXPOSURE PAPER SELECT COPY RATIO AUTO IMA SCAN COLOUR MODE RESOLUTION ADDRESS FORMA FAX PROGRAM RESOLUTION ADDRESS BROADCA

RESOLUTION

STANDARD

FINE SUPER FINE

BACK OK

You will return to the base GHI screen and the selected

resolution will appear in the PQRS resolution display.

The resolution selection screen will appear.

AUTO

4 Select the desired exposure with the

2 Select the resolution with the [] or [] key.

	PQ	RESOLUTION
			STANDARD
DED COPY			FINE
LEX SCAN			SUPER FINE
LEX SCAN	ACC
			AUTO
The selected resolution is
highlighted.
STANDARD	Use this setting for originals with
	normal-size text.
	Use this setting for originals with
FINE	small letters or detailed drawings.
	The original will be scanned at
	twice the resolution of Standard.
	Use this setting for originals with
SUPER FINE	intricate drawings or diagrams. A
	higher-quality image will be
	produced than with the Fine setting.
	Use this setting for originals with
	intricate drawings or diagrams.
ULTRA FINE	This setting gives the best image
	quality. However, transmission
	will take longer than with the
	other settings.

[ ] or [ ] key.

RESOLUTION

STANDARD

FINE

SUPER FINE

•To select a light setting for a dark original such as a

newspaper, press the [] key to move the setting toward ( ).

•To select a dark setting for a light original such as

writing in pencil or faint colour text, press the [] key to move the setting toward ( ).

•When the exposure setting reaches the left side or the right side, pressing the [] or [] key changes the exposure display from the 5-step display to "AUTO".

5 Press the [OK] key.

OK	You will return to the base
	screen and the selected
	exposure will appear in the
	exposure display.

(FINE/HALF

TONE)

(S-FINE/HALF

TONE)

(U-FINE/HALF

TONE)

Use halftone if your original is a photograph or has gradations of colour (such as a colour original). This setting will produce a clearer image than "FINE", "SUPER FINE", or "ULTRA FINE" used alone. When halftone is selected, transmission will take longer.

•	The default resolution setting is
Note	"STANDARD" and the default exposure
	setting is "AUTO". The default settings for
	the resolution and exposure can be
	changed in the system settings. (See
	"RES. CON. SET" on page 105.) When
	using the document glass to scan multiple
	original pages, the exposure setting can
	be changed each time you change pages.

To set the exposure next, press the [] or [] key and go to step 4.

RESOLUTION

STANDARD

FINE

SUPER FINE

When the [] or [] key is pressed, the exposure display changes from "AUTO" to a 5-step display.

When using the SPF/RSPF, the resolution

and exposure settings cannot be changed

once scanning has begun.

•Even if you send a fax using a high resolution setting such as "FINE", "SUPER FINE", or "ULTRA FINE", some receiving fax machines may print the fax at a lower resolution.

•To cancel a resolution or exposure selection, press the [CA] key.

14