Sharp MX-3500N manual Loading Paper in the Bypass Tray, Open the bypass tray

LOADING PAPER IN THE BYPASS TRAY

The bypass tray can be used to print and copy on plain paper, envelopes, label sheets, tab paper, and other special types of paper. Up to 100 sheets of paper can be loaded (up to 40 sheets of heavy paper) for continuous printing similar to the other trays.

For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "Paper Tray Settings" in the System Settings Guide.

Open the bypass tray.

1

When loading paper larger than A4R or 8-1/2" x 11"R, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed.

Set the bypass tray guides to the width of the paper.

2

Insert the paper along the bypass tray guides all the way into the bypass tray until it stops.

Insert the paper with the print side face down.

3

• Do not force the paper in.

• If the bypass tray guides are set wider than the paper, move the bypass tray guides in until they correctly fit the width of the paper. If the bypass guides are set too wide, the paper may skew or be creased.

28