Sharp MX-3500N manual Remove the misfed paper

Page 50

Remove the misfed paper.

Be careful not to tear the paper during removal.

6

Close the saddle stitch section cover.

7

Pull out the stapler section.

Pull out until the stapler section until it stops.

8

9	Roller rotating knob A

Staple unit

Turn roller rotating knob A in the direction of the arrow to move the staple unit out to the front.

Turn the roller rotating knob until the triangle mark is aligned with the indicator.

Remove the staple case.

10

	Raise the lever at the front end of the
	staple case and remove the jammed
11	staple.
11	Remove the leading staple if it is bent. If bent staples remain, a

staple jam will occur again.

49

Image 50

Contents Users Guide Table of Contents Manuals Provided with the Machine Manual name ContentsAbout this Manual Icons used in the manuals Part Names and Functions ExteriorTray Tray 4 when a stand/2 x 500 sheet paper drawer is installedSaddle stitch finisher Interior Automatic document feeder Document cover LAN connecter ConnectorsUSB connecter B type Telephone line socketOperation Panel Main power indicator Power Save key / indicatorPower key Clear ALL keyTouch Panel Using the touch panelSystem Settings Administrator Keys Touch Sound ExamplePRINT/SEND Status JOB Status Turning off the power Turning the Power on and OFFTurning on the power When using the fax or Internet fax functionsAuto power shut-off mode Sleep mode Power Save KEYPreheat Mode Energy Save FunctionsEnter your user number 5 to 8 digits User AuthenticationAuthentication by User Number With the numeric keysIf an incorrect user number is entered 3 times in a row Select your user name Authentication by Login Name / PasswordTouch the Login Name key or the key When logging in using the Direct Entry key Touch the Password keyIf you are logging in using a user selection key System Settings Administrator User Registration Tray numbers Important Points about PaperNames and Locations of Trays More information on plain paper and special paper Meaning of R in Paper SizesUseable Paper Paper that cannot be used Paper that is not recommendedTray Settings for Trays 1 to Loading PaperChanging the Paper Size If you changed the paper loaded in tray 1 to tray System Settings Paper Tray SettingsSet the paper size and paper type Pull out tray Place the paper in the centre of the paper tableSystem Settings Paper Tray Settings Loading Paper in the Bypass Tray Open the bypass traySelect the type of paper used in the bypass tray Open the paper settings screenTouch the paper type key of the bypass tray Set the paper sizeInserting tab paper Important Points When Using the Bypass TrayInserting paper Select the bypass trayExample of loading a envelope Inserting transparency filmInserting envelopes Pull out the right side cover Close the right side coverPlacing Originals in the Automatic Document Feeder Allowed original weightsPlacing the Original Make sure an original does not remainWhen the originals are different widths Adjust the original guides to the size of the originalsWhen the originals are the same width Place the originalPositions Close the automatic document feeder Placing the Original on the Document GlassOpen the automatic document feeder Place the original Allowed original sizes Maximum original sizeFeeder will rise Placing a thick bookHinges supporting the automatic document feeder Peripheral Devices Product name Product number DescriptionAR-PN1A Supplies FinisherPart Names Finisher Maintenance Replacing the staple cartridgeSlide the finisher back to the right Removing staple jamsReplace the staple case Close the coverSlide the finisher back to the right Discarding punch waste when a punch module is installed Gently push the box back Close the coverStapler section Saddle Stitch FinisherStapler compiler Front cover Saddle stitch tray Saddle Stitch Finisher Maintenance Open the front cover Pull out the stapler sectionClose the front cover Insert a new staple cartridge into the staple casePush the stapler section back Remove any paper from the stapler compiler Remove the misfed paper Push the stapler section back Discarding punch waste when a punch module is installed Regular Maintenance Cleaning the Document Glass and Automatic Document FeederDocument glass Automatic document feeder MX-3501N/4501NExamples of lines in the image Black lines White linesOther models As shown in Figure Cleaning the Main Charger of the Photoconductive DrumCleaning the Bypass Feed Roller Cleaning the Laser Unit Release the waste toner boxPull the replacement cleaner out of the waste toner box Make sure that the cleaner at the tipCleaning tool is not dirty Remove the dirty cleaner from the tip of the cleaning toolPush the waste toner box into the machine Clean the laser unitRepeat to clean all holes in the laser unit 4 holes Replace the cleaning tool Replacing the Toner Cartridges Insert the new toner cartridge horizontally Pull the toner cartridge toward youRemove the protective material from the new toner cartridge Push the cartridge in until it locks securely in placeClose the front cover Remove the waste toner box Replacing the Waste Toner BOXOpen the front cover Release the used waste toner box Remove the seals around the holes Install the new waste toner boxPlace the box on a flat surface Plug the holesPush the box in until it clicks into place Functions of the Main Keys Key DescriptionEntering Text from AN External Keyboard Changing the Entry ModeSymbols key Characters keyUsers Guide

Related manuals

Manual 170 pages 14.13 Kb

Manual 61 pages 44.33 Kb

Manual 132 pages 48.37 Kb