Sharp MX-3500N manual Close the front cover

Page 63

Close the front cover.

After the toner cartridge is replaced, the machine automatically enters image adjustment mode.

7

Caution

•Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

•Store toner cartridges out of the reach of small children.

•If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• If any one of the toner colours runs out (including black toner), colour copying will not be possible. If Y, M, or C toner runs out but Bk toner remains, black and white copying will still be possible.

•Keep the used toner cartridge in a plastic bag (do not discard it). The service technician will collect the used toner cartridge at the time of maintenance.

•To view the approximate amount of toner remaining, hold down the [COPY] key during copying, printing, or when the machine is idle. The percentage of toner remaining will appear in the display while you hold down the key. When the percentage falls to "25-0%", obtain a new toner cartridge and keep it ready for replacement.

62

Image 63

Contents Users Guide Table of Contents Manual name Contents About this ManualManuals Provided with the Machine Icons used in the manuals Exterior Part Names and FunctionsTray 4 when a stand/2 x 500 sheet paper drawer is installed Saddle stitch finisherTray Interior Automatic document feeder Document cover Telephone line socket ConnectorsUSB connecter B type LAN connecterOperation Panel Clear ALL key Power Save key / indicatorPower key Main power indicatorExample Using the touch panelSystem Settings Administrator Keys Touch Sound Touch PanelPRINT/SEND Status JOB Status When using the fax or Internet fax functions Turning the Power on and OFFTurning on the power Turning off the powerEnergy Save Functions Power Save KEYPreheat Mode Auto power shut-off mode Sleep modeWith the numeric keys User AuthenticationAuthentication by User Number Enter your user number 5 to 8 digitsIf an incorrect user number is entered 3 times in a row Authentication by Login Name / Password Touch the Login Name key or the keySelect your user name Touch the Password key If you are logging in using a user selection keyWhen logging in using the Direct Entry key System Settings Administrator User Registration Important Points about Paper Names and Locations of TraysTray numbers Meaning of R in Paper Sizes Useable PaperMore information on plain paper and special paper Paper that is not recommended Paper that cannot be usedLoading Paper Tray Settings for Trays 1 toChanging the Paper Size System Settings Paper Tray Settings Set the paper size and paper typeIf you changed the paper loaded in tray 1 to tray Place the paper in the centre of the paper table Pull out traySystem Settings Paper Tray Settings Open the bypass tray Loading Paper in the Bypass TraySet the paper size Open the paper settings screenTouch the paper type key of the bypass tray Select the type of paper used in the bypass traySelect the bypass tray Important Points When Using the Bypass TrayInserting paper Inserting tab paperInserting transparency film Inserting envelopesExample of loading a envelope Close the right side cover Pull out the right side coverMake sure an original does not remain Allowed original weightsPlacing the Original Placing Originals in the Automatic Document FeederPlace the original Adjust the original guides to the size of the originalsWhen the originals are the same width When the originals are different widthsPositions Allowed original sizes Maximum original size Placing the Original on the Document GlassOpen the automatic document feeder Place the original Close the automatic document feederPlacing a thick book Hinges supporting the automatic document feederFeeder will rise Product name Product number Description Peripheral DevicesAR-PN1A Finisher Part NamesSupplies Replacing the staple cartridge Finisher MaintenanceClose the cover Removing staple jamsReplace the staple case Slide the finisher back to the rightSlide the finisher back to the right Gently push the box back Close the cover Discarding punch waste when a punch module is installedFront cover Saddle stitch tray Saddle Stitch FinisherStapler compiler Stapler sectionOpen the front cover Pull out the stapler section Saddle Stitch Finisher MaintenanceInsert a new staple cartridge into the staple case Push the stapler section backClose the front cover Remove any paper from the stapler compiler Remove the misfed paper Push the stapler section back Discarding punch waste when a punch module is installed Cleaning the Document Glass and Automatic Document Feeder Regular MaintenanceBlack lines White lines MX-3501N/4501NExamples of lines in the image Document glass Automatic document feederOther models Cleaning the Main Charger of the Photoconductive Drum Cleaning the Bypass Feed RollerAs shown in Figure Release the waste toner box Cleaning the Laser UnitRemove the dirty cleaner from the tip of the cleaning tool Make sure that the cleaner at the tipCleaning tool is not dirty Pull the replacement cleaner out of the waste toner boxClean the laser unit Repeat to clean all holes in the laser unit 4 holesPush the waste toner box into the machine Replace the cleaning tool Replacing the Toner Cartridges Push the cartridge in until it locks securely in place Pull the toner cartridge toward youRemove the protective material from the new toner cartridge Insert the new toner cartridge horizontallyClose the front cover Replacing the Waste Toner BOX Open the front cover Release the used waste toner boxRemove the waste toner box Plug the holes Install the new waste toner boxPlace the box on a flat surface Remove the seals around the holesPush the box in until it clicks into place Key Description Functions of the Main KeysCharacters key Changing the Entry ModeSymbols key Entering Text from AN External KeyboardUsers Guide

Related manuals

Manual 170 pages 14.13 Kb

Manual 61 pages 44.33 Kb

Manual 132 pages 48.37 Kb