Sharp MX-3500N manual Clean the laser unit, Repeat to clean all holes in the laser unit 4 holes

Page 59

Holes

Clean the laser unit.

(1)Point the cleaner down and slowly insert the tool into the hole that you wish to clean.

Be sure to point the cleaner down.

(2)Insert the cleaning tool all the way into the hole and then pull it back out.

Pull the cleaning tool out until you feel the tip of the tool leave the cleaning surface of the laser unit.

(3)Repeat step (2) two or three times and then remove the cleaning tool.

Repeat step 8 to clean all holes in the laser unit (4 holes).

There are a total of 4 holes to be cleaned in the laser unit, including the hole cleaned in step 8. Clean all holes.

Push the waste toner box into the machine.

Push the waste toner box firmly in until it clicks into place.

Image 59

Contents Users Guide Table of Contents Manuals Provided with the Machine Manual name ContentsAbout this Manual Icons used in the manuals Exterior Part Names and FunctionsTray Tray 4 when a stand/2 x 500 sheet paper drawer is installedSaddle stitch finisher Interior Automatic document feeder Document cover Telephone line socket ConnectorsUSB connecter B type LAN connecterOperation Panel Clear ALL key Power Save key / indicatorPower key Main power indicatorExample Using the touch panelSystem Settings Administrator Keys Touch Sound Touch PanelPRINT/SEND Status JOB Status When using the fax or Internet fax functions Turning the Power on and OFFTurning on the power Turning off the powerEnergy Save Functions Power Save KEYPreheat Mode Auto power shut-off mode Sleep modeWith the numeric keys User AuthenticationAuthentication by User Number Enter your user number 5 to 8 digitsIf an incorrect user number is entered 3 times in a row Select your user name Authentication by Login Name / PasswordTouch the Login Name key or the key When logging in using the Direct Entry key Touch the Password keyIf you are logging in using a user selection key System Settings Administrator User Registration Tray numbers Important Points about PaperNames and Locations of Trays More information on plain paper and special paper Meaning of R in Paper SizesUseable Paper Paper that is not recommended Paper that cannot be usedLoading Paper Tray Settings for Trays 1 toChanging the Paper Size If you changed the paper loaded in tray 1 to tray System Settings Paper Tray SettingsSet the paper size and paper type Place the paper in the centre of the paper table Pull out traySystem Settings Paper Tray Settings Open the bypass tray Loading Paper in the Bypass TraySet the paper size Open the paper settings screenTouch the paper type key of the bypass tray Select the type of paper used in the bypass traySelect the bypass tray Important Points When Using the Bypass TrayInserting paper Inserting tab paperExample of loading a envelope Inserting transparency filmInserting envelopes Close the right side cover Pull out the right side coverMake sure an original does not remain Allowed original weightsPlacing the Original Placing Originals in the Automatic Document FeederPlace the original Adjust the original guides to the size of the originalsWhen the originals are the same width When the originals are different widthsPositions Allowed original sizes Maximum original size Placing the Original on the Document GlassOpen the automatic document feeder Place the original Close the automatic document feederFeeder will rise Placing a thick bookHinges supporting the automatic document feeder Product name Product number Description Peripheral DevicesAR-PN1A Supplies FinisherPart Names Replacing the staple cartridge Finisher MaintenanceClose the cover Removing staple jamsReplace the staple case Slide the finisher back to the rightSlide the finisher back to the right Gently push the box back Close the cover Discarding punch waste when a punch module is installedFront cover Saddle stitch tray Saddle Stitch FinisherStapler compiler Stapler sectionOpen the front cover Pull out the stapler section Saddle Stitch Finisher MaintenanceClose the front cover Insert a new staple cartridge into the staple casePush the stapler section back Remove any paper from the stapler compiler Remove the misfed paper Push the stapler section back Discarding punch waste when a punch module is installed Cleaning the Document Glass and Automatic Document Feeder Regular MaintenanceBlack lines White lines MX-3501N/4501NExamples of lines in the image Document glass Automatic document feederOther models As shown in Figure Cleaning the Main Charger of the Photoconductive Drum Cleaning the Bypass Feed Roller Release the waste toner box Cleaning the Laser UnitRemove the dirty cleaner from the tip of the cleaning tool Make sure that the cleaner at the tipCleaning tool is not dirty Pull the replacement cleaner out of the waste toner boxPush the waste toner box into the machine Clean the laser unitRepeat to clean all holes in the laser unit 4 holes Replace the cleaning tool Replacing the Toner Cartridges Push the cartridge in until it locks securely in place Pull the toner cartridge toward youRemove the protective material from the new toner cartridge Insert the new toner cartridge horizontallyClose the front cover Remove the waste toner box Replacing the Waste Toner BOXOpen the front cover Release the used waste toner box Plug the holes Install the new waste toner boxPlace the box on a flat surface Remove the seals around the holesPush the box in until it clicks into place Key Description Functions of the Main KeysCharacters key Changing the Entry ModeSymbols key Entering Text from AN External KeyboardUsers Guide

Related manuals

Manual 170 pages 14.13 Kb

Manual 61 pages 44.33 Kb

Manual 132 pages 48.37 Kb