Sharp XE-A212 Temporary EJ printing during a transaction, PGM mode operation records type

A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 55

Temporary EJ printing during a transaction

• If selecting “enable”, you can print journal data of a current transaction recorded in EJ memory by pressing the Rkey during the transaction. To realize this function completely, the cash register must be programmed to print the receipt and set the Receipt ON/OFF function to OFF.

PGM mode operation records type

•The header information only is printed during the program reading operation. The header information only is printed for X/Z reports.

(Receipt sample for Header Information only)

Action when EJ memory area is full

•By default, when the memory for EJ becomes nearly full, the cash register shows “N” at the 14th position of the display (EJ memory nearly full message), and the cash register keeps storing new data while erasing the oldest data. When “0” is selected, the cash register will no longer show EJ memory nearly full message. When “2” is selected, the cash register shows EJ memory nearly full message and when the memory is totally full, the cash register locks the sales/data entry with a display of the memory full message “EJ DATA FULL” . You must issue an EJ report (Z1 report) at this time.

Job code: 69
* Item:			Selection:	Entry:
	A	G.C. receipt (bill) print on journal	No*	0
			Yes	1
	B	Always enter 0.		0
	C	Always enter 1.		1
	D	Rounding of foreign currency for V	Rising to unit*	0
			Round off (4 down/5 up)	1
	E	Tax system	Auto tax 1-4	0
			Auto VAT 1-4*	1
			Manual VAT 1-4	2
			Manual VAT 1	3
			Manual tax 1-4	4
			Auto VAT 1 & Auto tax 2-4	5
	F	Tax print when taxable subtotal is zero	No*	0
			Yes	1
	G	Tax print when tax is zero	Yes*	0
			No	1
	H	Rounding system	Normal*	0
			Sweden	1
			Denmark	2

Rounding system

• When you live in Sweden or Denmark, change the default setting (H=0) to the corresponding setting.

55