MicroNet Technology SP5001/S user manual Network Interface Screen, H323 Configuration

6.Network Interface Screen

Click Network Interface in the navigation panel and open the Network Interface Screen.

Use this screen to setup Network Interface identification information for SP5001/S.

Figure 17. Network Interface

The following table describes this screen.

	Table 3. H323 Configuration
LABEL	DESCRIPTION
IP Address	Enter the IP Address of SP5001/S in dotted decimal notation for e.g.
	192.168.4.92. Range of IP Address setting (0.0.0.0~255.255.55.255).
Subnet Mask	Enter the IP Subnet Mask of your SP5001/S in dotted decimal notation for
	e.g. 255.255.0.0.
Default Routing	Enter the IP Address of the default-outgoing gateway of your SP5001/S in
Gateway	dotted decimal notation for e.g. 192.168.1.254.
DHCP	Select enable/disable Dynamic Host Configuration.
DNS primary	Enter the DNS IP Address in dotted decimal notation for e.g. 168.95.1.1
DNS Secondary	Enter the DNS secondary IP Address in dotted decimal notation for e.g.
	168.95.1.1
SNTP	Select enable/disable Simple Network Time Protocol.
	33