10.Phone Pattern Screen
The progress tone of SP5001/S is configurable. Default tone value is set according to U.S. tone specification. Users may adjust the values according to their own country’s tone specification or
Click Phone Pattern in the navigation panel and open the Phone Pattern Screen.
Figure 21. Phone Pattern
The following table describes this screen.
|
| Table 7. Phone Pattern Configuration |
|
|
|
| LABEL | DESCRIPTION |
| Ring Tone | Setting the played tone type, when SP5001/S is receiving a call. |
|
|
|
| Ring Back Tone | Setting the played tone type, when SP5001/S receives a Q.931 Alerting |
|
| message. In condition that SP5001/S is the originating side. |
|
|
|
| Busy Tone | Setting the played tone type, when destination is busy. |
|
|
|
| Dial Tone | Setting the played tone type, when hook off a phone set of workable |
|
| SP5001/S. |
|
|
|
| 2nd Dial Tone | Set the detective flash range in ms, for example, |
|
|
|
| OK | Click OK to save your changes back to volatile memory. |
|
|
|
|
|
|
|
| 39 |