MicroNet Technology SP5001/S user manual Time command list Ping

Page 70

19.7.7[time]

When SNTP function of SP5001/S is enabled and SNTP server can be found as well, type time command to show current network time.

usr/config$ time

Current time is WED SEP 17 12:36:49 2003

usr/config$

Figure 46. time command list

19.7.8[ping]

Use ping to test whether a specific IP is reachable or not.

For example: if 192.168.1.2 is not existing while 210.63.15.32 exists. Users will have the following results:

usr/config$ ping 192.168.1.2 no answer from 192.168.1.2 usr/config$ ping192.168.1.254 PING 192.168.1.254: 56 data bytes

64bytes from 192.168.1.254: icmp_seq=0. time=5. ms

64bytes from 192.168.1.254: icmp_seq=1. time=0. ms

64bytes from 192.168.1.254: icmp_seq=2. time=0. ms

64bytes from 192.168.1.254: icmp_seq=3. time=0. ms

----192.168.1.254 PING Statistics----

4packets transmitted, 4 packets received, 0% packet loss round-trIP (ms) min/avg/max = 0/1/5

210.63.15.32 is alive usr/config$

Figure 47. ping command list

69

Image 70
Contents IP Telephony Gateway Table of Contents Voice Setting Screen List of Figures Change password Screen List of Tables About this User’s Manual Audio feature Features of SP5001/SKey Features SP5001/S OverviewTelnet and Web Login Password Default SettingsRemote Firmware Upgrade SecurityFront Panels Back PanelHardware Specifications 1 SP5001/S LEDs SP5001/S LEDs DescriptionsCOM Port Back Panel Port Ethernet PortTEL Port 12V DC Port Back Panel ConnectionsAdditional Installation Requirements Setting Up the TCP/IP ProtocolPower Up Your SP5001/S Accessing the Web Configuration Web Configuration with FXS IntroductionWelcome Screen SP5001/S web configuration welcome screen Navigation Panel LinksSaving Your Configuration Navigating the Web ConfigurationGeneral Configuration Initial ConfigurationStatic IP address Commit Data Dhcp mode IP Sharing Configuration One Sets SP5001/SEnable the IP sharing function Two sets attached to IP Sharing Device Router See following for example Page Configure the gateway into the Peer-to-Peer mode Making a VoIP CallPhone Book On table will display on the first index Configure the gateway into the Proxy routed mode Configure the Proxy InfomationUpdate Application Version Upgrade ROM VersionBefore you start downloading ROM File Upgrade OK Page H323 Configuration Network Interface ScreenGMT SIP Information Screen SIP InformationSystem Configuration Screen System ConfigurationVoice Setting Screen Voice ConfigurationBecause this might cause incompatibility Phone Pattern Configuration Phone Pattern ScreenSupport Configuration Support Function ScreenPhone Book Screen Label Description Dscp Configuration Screen Dscp ConfigurationPassword Screen PasswordROM Upgrade Screen Flash Clean Screen Commit Data Screen Reboot System Screen Command List Hyper Terminal SettingConnect To Initial Screen Entering Login Initial ScreenCommand Structure in SP5001/S Command Structure in SP5001/SSet Password Set up IP AddressProxy mode Application Mode ConfigurationSaving Your Configuration Application modesUsr/config$ security -line 1 -name 12345 -password Peer-to-Peer Mode Behind IP-Sharing Mode One Set of SP5001/S DMZ Two Sets of SP5001/S UDP PPPoE Mode Upgrade steps How to upgradeBefore you start downloading Usr/config$ rom -hwver Commands in SP5001/S Commands in SP5001/SSystem Commands Overview QuitParameter Usages Flash command list FlashCommit command list Ifaddr CommitIfaddr -print command list Time command list Ping TimePhone book command list PbookPhoneBook Rules Pppoe command list PppoeSystem information command list SysconfSysconf -print command list Sip command list 19.7.12 sipSip -print command list Security Command List Voice command list VoiceParameters because this might cause incompatibility Voice -print command list Support Support -print command list 19.7.16 tos Phone command list PhonePhone -print rbt command list Rom command list 19.7.18 romRom -print command list Passwd