MicroNet Technology SP5001/S user manual Commit command list Ifaddr

19.7.5[commit]

Save changes after configuring SP5001/S.

usr/config$ commit

This may take a few seconds, please wait....

Commit to flash memory ok! usr/config$

Figure 43. commit command list

Note: Users shall use commit to save modified value, or they will not be activated after system reboot.

19.7.6[ifaddr]

Configure and display network information.

usr/config$ ifaddr

LAN information and configuration Usage:

ifaddr [-print][-dhcp used][-sntp mode [server]]

ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway] ifaddr [-dns index [dns server address]]

-print	Display LAN information and configuration.
-ip	Specify ip address.
-mask	Set Internet subnet mask.
-gate	Specify default gateway ip address
-dhcp	Set DHCP client service flag (On/Off).
-sntp	Set SNTP server mode and specify IP address.
-dns	specify IP address of DNS Server.
-timezone	Set local timezone.
-ipsharing Specify usage of an IP sharing device and specify IP
address.
-upnp	Specify the upnp mode of ipsharing(0:Off/1:On)
Note:

Range of ip address setting (0.0.0.0 ~ 255.255.255.255).

DHCP client setting value (On=1, Off=0). If DHCP set to 'On', Obtain a set of Internet configuration from DHCP server assigned. SNTP mode (0=no update, 1=specify server IP, 2=broadcast mode).

Example:

ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254 ifaddr -dhcp 1

ifaddr -sntp 1 210.59.163.254 ifaddr -ipsharing 1 210.59.163.254 ifaddr -upnp 1

ifaddr -dns 1 168.95.1.1

usr/config$

Figure 44. ifaddr command list

67