MicroNet Technology SP5001/S user manual Usr/config$ rom -hwver

B.2MB Rom:

usr/config$ rom –boot2m –s 192.168.1.1 –f 2m4asipfxs.104b Description: -app / -boot2m means the prepared upgrade Rom; -s means

where the TFTP / FTP server IP Address is; -f is the Rom file name. Step 4. Download complete

A.Application Rom:

Use command [flash -clean] to clear old configurations. It will keep all configurations in [ifaddr] and [pppoe].

B.2MB Rom:

All configurations will be back to default value, including IP Address. In other word, user has to set IP Address and MAC Address before [reboot] the device; otherwise, user cannot access to device any more via Telnet.

Steps 4.1 Find out MAC Address:

There are 12 digits on label on the back panel of the device, or command as

usr/config$ ifaddr –ifshow(find the list information of Ethernet address, it is MAC Address.

usr/config$ setmac (set as 2 digits as a group) 00 01

a8

00 xx xx

If confirmed, press y.

Steps 4.2: Set IP Address

usr/config$ ifaddr –ip xxx.xxx.xxx.xxx –mask

xxx.xxx.xxx.xxx –gate xxx.xxx.xxx.xxx (Please refer to Chapter 19.7.6)

Steps 4.3: Hardware version confirmation

Upgrade 2MB Rom may change the hardware column. If it is not as the same as the one, which is found on the label of back panel, please command as

usr/config$ rom –hwver x.x

Steps 4.4: [commit], [reboot]

62