MicroNet Technology user manual Behind IP-Sharing Mode One Set of SP5001/S

Page 57

Note: The command is to add a record onto PhoneBook. After the command completed, you can type “pbook –print” to see if the input record is correct.

When adding a record to Phone Book, users do not have to reboot the machine, and the record will be effective immediately. For phonebook configuration, please refer to Chapter 19.7.9.

19.4.3Behind IP-Sharing Mode One Set of SP5001/S

The function is for user whose network environment is behind IP Sharing device. It is said SP5001/S is connected to the IP Sharing device (Router).

An example such as ADSL network is in the following.

1.The WAN IP Address obtained from ADSL has two kinds of methods. One is fixed IP Address, while user applies for one or more fixed IP Addresses. Another is dynamic IP Address while user applies for dial-up connection way.

2.The LAN IP Address of User’s PC can be set as DHCP client in order to gain an valid one.

3.One can also assign a fixed IP address which belongs to the same network segment as the LAN interface of IP Sharing device.

4.SP5001/S must enable the IP Sharing function for the fixed / dynamic WAN IP Address.

56

Image 57
Contents IP Telephony Gateway Table of Contents Voice Setting Screen List of Figures Change password Screen List of Tables About this User’s Manual Key Features Features of SP5001/SAudio feature SP5001/S OverviewRemote Firmware Upgrade Default SettingsTelnet and Web Login Password SecurityBack Panel Front Panels1 SP5001/S LEDs SP5001/S LEDs Descriptions Hardware SpecificationsBack Panel Port Ethernet Port COM PortTEL Port Back Panel Connections 12V DC PortSetting Up the TCP/IP Protocol Additional Installation RequirementsPower Up Your SP5001/S Web Configuration with FXS Introduction Accessing the Web ConfigurationWelcome Screen Navigation Panel Links SP5001/S web configuration welcome screenNavigating the Web Configuration Saving Your ConfigurationInitial Configuration General ConfigurationStatic IP address Commit Data Dhcp mode One Sets SP5001/S IP Sharing ConfigurationEnable the IP sharing function Two sets attached to IP Sharing Device Router See following for example Page Making a VoIP Call Configure the gateway into the Peer-to-Peer modePhone Book On table will display on the first index Configure the Proxy Infomation Configure the gateway into the Proxy routed modeUpgrade ROM Version Update Application VersionBefore you start downloading ROM File Upgrade OK Page Network Interface Screen H323 ConfigurationGMT SIP Information SIP Information ScreenSystem Configuration System Configuration ScreenVoice Configuration Voice Setting ScreenBecause this might cause incompatibility Phone Pattern Screen Phone Pattern ConfigurationSupport Function Screen Support ConfigurationPhone Book Screen Label Description Dscp Configuration Dscp Configuration ScreenPassword Password ScreenROM Upgrade Screen Flash Clean Screen Commit Data Screen Reboot System Screen Hyper Terminal Setting Command ListConnect To Initial Screen Initial Screen Entering LoginSet Password Command Structure in SP5001/SCommand Structure in SP5001/S Set up IP AddressSaving Your Configuration Application Mode ConfigurationProxy mode Application modesUsr/config$ security -line 1 -name 12345 -password Peer-to-Peer Mode Behind IP-Sharing Mode One Set of SP5001/S DMZ Two Sets of SP5001/S UDP PPPoE Mode How to upgrade Upgrade stepsBefore you start downloading Usr/config$ rom -hwver Commands in SP5001/S Commands in SP5001/SQuit System Commands OverviewParameter Usages Flash Flash command listCommit Commit command list IfaddrIfaddr -print command list Time Time command list PingPbook Phone book command listPhoneBook Rules Pppoe Pppoe command listSysconf System information command listSysconf -print command list 19.7.12 sip Sip command listSip -print command list Security Command List Voice Voice command listParameters because this might cause incompatibility Voice -print command list Support Support -print command list 19.7.16 tos Phone Phone command listPhone -print rbt command list 19.7.18 rom Rom command listRom -print command list Passwd