MicroNet Technology SP5001/S user manual Support -print command list 19.7.16 tos

Page 82

Note: it is not recommended to change the value in this command, only if users do know well the application. This might cause incompatibility with other devices.

usr/config$ support -print

Special Voice function support manipulation

T.38(FAX) support : Disabled

usr/config$

Figure 61. support –print command list

19.7.16 [tos]

IP Packet ToS (type of Service)/Differentiated Service configuration.

usr/config$ tos

IP Packet ToS(type of Service)/Differentiated Service configuration Usage:

tos [-rtptype dscp] tos [-sigtype dscp] tos -print

[-rtpreliab mode] tos -print

Example:

tos -rtptype 7 -sigtype 0

usr/config$

Figure 62. tos command list

Parameter Usages:

-rtptype	the packages of voice
-sigtype	the package of call signal

Note: The value of rtptype and sigtype is from 0 to 63. It’s working if it supported by your network.

usr/config$ tos -print

IP Packet ToS information:

Signalling Packet:

DSCP Code	:	0
Media Packet:
DSCP Code	:	0

usr/config$

Figure 63. tos –print command list

81

Image 82

Contents IP Telephony Gateway Table of Contents Voice Setting Screen List of Figures Change password Screen List of Tables About this User’s Manual Audio feature Features of SP5001/SKey Features SP5001/S OverviewTelnet and Web Login Password Default SettingsRemote Firmware Upgrade SecurityFront Panels Back PanelHardware Specifications 1 SP5001/S LEDs SP5001/S LEDs DescriptionsCOM Port Back Panel Port Ethernet PortTEL Port 12V DC Port Back Panel ConnectionsAdditional Installation Requirements Setting Up the TCP/IP ProtocolPower Up Your SP5001/S Accessing the Web Configuration Web Configuration with FXS IntroductionWelcome Screen SP5001/S web configuration welcome screen Navigation Panel LinksSaving Your Configuration Navigating the Web ConfigurationGeneral Configuration Initial ConfigurationStatic IP address Commit Data Dhcp mode IP Sharing Configuration One Sets SP5001/SEnable the IP sharing function Two sets attached to IP Sharing Device Router See following for example Page Configure the gateway into the Peer-to-Peer mode Making a VoIP CallPhone Book On table will display on the first index Configure the gateway into the Proxy routed mode Configure the Proxy InfomationUpdate Application Version Upgrade ROM VersionBefore you start downloading ROM File Upgrade OK Page H323 Configuration Network Interface ScreenGMT SIP Information Screen SIP InformationSystem Configuration Screen System ConfigurationVoice Setting Screen Voice ConfigurationBecause this might cause incompatibility Phone Pattern Configuration Phone Pattern ScreenSupport Configuration Support Function ScreenPhone Book Screen Label Description Dscp Configuration Screen Dscp ConfigurationPassword Screen PasswordROM Upgrade Screen Flash Clean Screen Commit Data Screen Reboot System Screen Command List Hyper Terminal SettingConnect To Initial Screen Entering Login Initial ScreenCommand Structure in SP5001/S Command Structure in SP5001/SSet Password Set up IP AddressProxy mode Application Mode ConfigurationSaving Your Configuration Application modesUsr/config$ security -line 1 -name 12345 -password Peer-to-Peer Mode Behind IP-Sharing Mode One Set of SP5001/S DMZ Two Sets of SP5001/S UDP PPPoE Mode Upgrade steps How to upgradeBefore you start downloading Usr/config$ rom -hwver Commands in SP5001/S Commands in SP5001/SSystem Commands Overview QuitParameter Usages Flash command list FlashCommit command list Ifaddr CommitIfaddr -print command list Time command list Ping TimePhone book command list PbookPhoneBook Rules Pppoe command list PppoeSystem information command list SysconfSysconf -print command list Sip command list 19.7.12 sipSip -print command list Security Command List Voice command list VoiceParameters because this might cause incompatibility Voice -print command list Support Support -print command list 19.7.16 tos Phone command list PhonePhone -print rbt command list Rom command list 19.7.18 romRom -print command list Passwd