MicroNet Technology SP5001/S user manual 19.7.18 rom, Rom command list

19.7.18 [rom]

ROM file information and firmware upgrade function.

usr/config$ rom

ROM files updating commands Usage:

rom [-print] [-app] [-boot] [-dsptest] [-dspcore] [-dspapp] -s TFTP/FTP server ip -f filename

rom -print
-print	show versions of rom files. (optional)
-app	update main application code(optional)
-boot	update main boot code(optional)
-boot2m	update 2M code(optional)
-dsptest	update DSP testing code(optional)
-dspcore	update DSP kernel code(optional)
-dspapp	update DSP application code(optional)
-s	IP address of TFTP/FTP server (mandatory)
-f	file name(mandatory)
-method	download via TFTP/FTP (TFTP: mode=0, FTP: mode=1)
-ftp	specify username and password for FTP
Note:

This command can run select one option in 'app', 'boot', 'dsptest', 'dspcore', and 'dspapp'.

Example:

rom -method 1

rom -ftp vwusr vwusr

rom -app -s 192.168.4.101 -f app.bin

usr/config$

Figure 66. rom command list

Parameter Usages:
-print	show versions of all rom files
-app, boot, boot2m, dsptest, dspcore, dspapp		to update main Application

program code, Boot code, DSP testing code, DSP kernel code, or DSP application code.

Most of all, the Rom file needed to get upgrade is App or Boot2m. Please check the exactly Rom file before doing download procedure.

-s	to specify TFTP server’s IP address when upgrading ROM files.
-f	to specify the target file name, which will replace the old one.

-method to decide using TFTP or FTP as file transfer server. “0” stands for TFTP, while “1” stands for FTP.

-ftp if users choose FTP in above item, it is necessary to specify pre-defined username and password when upgrading files.

84