MicroNet Technology SP5001/S user manual System Configuration Screen

8.System Configuration Screen

Click System conf in the navigation panel and open the System Configuration Screen.

Figure 19. System Configuration

The following table describes this screen.

	Table 5. System Configuration
LABEL	DESCRIPTION
Keypad Type	Select In-Band, RFC2833 on DTMF relay type
RFC2833 Payload	RFC2833 Payload Type (range:96~128 inter-used:100,102~105)
Type
FAX Payload Type	Set Fax Payload Type (range: 96 or 101, default: 101)
Inter Digit Time	Set the DTMF inter digit time (second)
Busy Forward	Enable it to route the call to the next line (While the line number is not
	matched or engaged)
End of Dial Digit	Set end of dial key as NONE, * , or #.
OK	Click OK to save your changes back to volatile memory.

36