MicroNet Technology SP5001/S user manual Ifaddr -print command list

Parameter Usages:

-print	print current IP setting and status
-ip	assigned IP address for SP5001/S
-mask	internet subnet mask
-gate	IP default gateway
-dhcp	Dynamic Host Configuration (1 = ON; 0 = OFF)
-sntp	Simple Network Time Protocol (1 = ON; 0 = OFF) When SNTP
	function is activated, users have to specify a SNTP server as
	network time source. An example is demonstrated below:
-dns	Specify Primary (-dns 1) or Secondary (-dns 2) DNS Server IP
address.
usr/config$		ifaddr -dns 1 168.95.1.1
usr/config$		ifaddr -dns 2 203.23.123.2
-timezone	set local time zone according to GMT

usr/config$ ifaddr -sntp 1 10.1.1.1

While 10.1.1.1 stands for SNTP server’s IP address.

-ipsharing	To specify a global fixed IP address, user can add this IP address
	in the command.
	usr/config$ ifaddr -ipsharing 1 210.11.22.33
-upnp	Enable/ Disable UPnP function. If IP sharing has this function, use
	can enable upnp function that user doesn’t need to configure
	gateway or IP sharing for NAT function.

usr/config$ ifaddr -print

Internet address information

IP address	: 192.168.4.72
Subnet mask	: 255.255.0.0
Default gateway	: 192.168.1.254
DHCP startup	: OFF
SNTP	: mode=1
	server 168.95.195.12
	time zone : GMT+8
	cycle=1024 mins
IPSharing	: no IPSharing device.
Primary DNS Server	: 168.95.1.1

Secondary DNS Server : 168.95.1.1 usr/config$

Figure 45. ifaddr –print command list

68