MicroNet Technology SP5001/S user manual 19.7.12 sip, Sip command list

19.7.12 [sip]

This command is to configure SIP related parameters.

usr/config$ sip

SIP stack information and configuration

Usage:
sip [-mode	pxmode]
sip [-px address] [-domain domain] [-prefix prefixstring]
[-line1 number]
[-expire t1] [-port udpPort] [-rtp rtpPort]
sip -print
-print	Display SIP stack information and configuration.
-mode	Configure as Proxy mode or Peer-to-Peer mode.
-px	Proxy server address. (Proxy IPv4 address or Proxy dns
name)
-pxport	Proxy server port.	(the port of proxy)
-domain	Specify domain name in the URL (if domain name is not
used,		specify as
null)
-prefix	Specify prefix string, use it when UserID contains
alphabets	(if UserID uses numerals, specify as null)
-line1	TEL1 Phone number.
-expire	The relative time after which the message expires(0 ~
(2^31-1))
-port	SIP local UDP port number (5060~5070), Default: 5060
-rtp	RTP port number (2326~65534), Default: 16384
Example:

sip -px 210.59.163.171 -line1 70

usr/config$

Figure 54. sip command list

Parameter Usages:

-mode	Configure as Proxy mode or Peer-to-Peer mode (0:
	Peer-to-Peer mode, 1: Proxy mode).
-px	to specify Proxy address when SP5001/S is in proxy mode.
	Proxy address can be IPv4 address or DNS name.
-domian	specify the domain name such as “sipcenter.com” and it will be
	presented in the URL (xxxx@sipcenter.com).
-prefix	when your username contains alphabets, for example sip1123,
	specify the prefix string as “sip”.
-line1	assign line 1 number.
-expire	this parameter is used to inform proxy server the valid duration

75