MicroNet Technology SP5001/S user manual Phone command list

19.7.17 [phone]

The progress tone of SP5001/S is configurable. Default tone value is set according to U.S. tone specification. Users may adjust the values according to their own country’s tone specification or users-defined tone specification.

usr/config$ phone

Phone ringing , ringback tone , busy tone , dial tone setting and notes Usage:

phone [-ring [freq			] [ringON	] [ringOFF ] [ringLevel]]
[-rbt	[freqHi ] [freqLo			] [freqHiLev] [freqLoLev]
	[Tone1ON] [Tone1OFF] [Tone2ON				] [Tone2OFF ]]
[-bt	[freqHi ] [freqLo			] [freqHiLev] [freqLoLev]
	[Tone1ON] [Tone1OFF] [Tone2ON				] [Tone2OFF ]]
[-dt	[freqHi ] [freqLo			] [freqHiLev] [freqLoLev]
	[Tone1ON] [Tone1OFF] [Tone2ON				] [Tone2OFF ]]
[-flash [freqLo ] [freqHi ]]
[-level [loopCurrentLevel] [onhookLineVoltageLevel ]]
phone [-print [ring][rbt][bt][dt][flash]]
-print	Display phone ringing/tone configuration.
	ring :		ringing
	rbt	:	ringback tone
	bt	:	busy tone
	dt	:	dial tone
	flash:		flash tone
-ring	ringing configuration set .
-rbt	ringback tone configuration set.
-bt	busy tone configuration set.
-dt	dial tone configuration set.
-flash	flash configuration set .
-level	Loop Current and On-Hook Line Voltage level set .

Note:
ringing frequency		: 15 ~ 100		(Unit : Hz)
ringing ring ON/OFF : 0			~ 8000	(Unit : ms)
ringing level		: 0	~ 94	(Unit : V)
tone	frequency	: 0	~ 65535 (Unit : Hz)
tone	freqLevel	: 0	~ 65535 (Unit : mVrms)
tone	Tone ON/OFF : 0		~ 8000	(Unit : ms)
level	loopCurrent : 0		~ 7	(20mA ~ 41mA, Step : 3mA)
level	OnHookVol	: 0	~ 63	( 0V ~ 94.5V, Step : 1.5V)
Example:

phone	-print rbt
phone	-ring 20		2000 4000 94
phone	-rbt 480		440 125 105 2000 4000 2000 4000
phone	-bt 620	480		125 105 500 500 500	500
phone	-dt 440	350		96 96 8000 0 8000 0
phone	-flash 400 800
phone	-level 1		32

usr/config$

Figure 64. phone command list

82