MicroNet Technology SP5001/S user manual Security Command List

19.7.13 [security]

This command is used to configure the account information included username and password obtained from the service provider

usr/config$ security

Security information and configuration Usage:

security [-name username] [-pwd password] security -print

-print	Display system account information and configuration.
-line	Specify which line number you want to set the account.
-name	Specify user name.
-pwd	Specify password.
Example:

security -line 1 -name 1001 -pwd 1001

usr/config$

Figure 56. security Command List

Parameter Usages:

-print	print current setting in security command.
-line	Specify which line number you want to set into the account
	Note: If you have only one account, you can set into line1 using
	this parameter. For example, if you set the account into line1,
	line1 can accept incoming calls.
-name	Specify the username of your account information.
-pwd	Specify the password of your account information.

usr/config$ security -print

Line1 account information Username : 1001 Password : nil

usr/config$

Figure 57. security –print command list

77