If you entered a mailbox number in Step 3:
The system plays:
Reinitialized.
4 . Press [ * ] [ * ] [ 9 ] to quit, or hang up.
Reinitializing a Password
If a subscriber forgets the password for his or her mailbox, you can reinitialize the password to the factory setting of 1234 so the user can retrieve messages. Remind the subscriber to change the password immediately after logging in for the first time.
✏NOTE:
You cannot use this procedure to reinitialize the System Manager's password for mailbox 0. If you change the System Manager's password and forget it, you can contact the National Customer Care Center at
1 800
To reinitialize a password to 1234:
1 .
2.
3.
If necessary, access the Programming Main Menu. If you are already at the Programming Main Menu, skip to Step 2.
A ) Call PARTNER Voice Messaging:
■If calling internally, press [ Intercom ] [ 7 ] [ 7 ] [ 7 ] or the programmed VMMsgs button (see programming instructions on page 33).
■If calling from outside the system, press [ * ] [ R ] ([ * ] [ 7 ]) during the general mailbox greeting.
B ) Enter [ 0 ] followed by the password for mailbox 0.
Press [ 9 ] followed by the mailbox number to reinitialize a password. The system plays:
The password has been reinitialized.
Press [ * ] [ * ] [ 9 ] or hang up to quit.