5.At this point, do one of the following:
■Go to Step 3 of the next procedure to program another button for this extension.
■Press [ Central Tel Program ] and go to Step 2 of any button programming procedure in this section to program a button for a different extension.
■Press [ Feature ] [ 0 ] [ 0 ] to exit.
Do Not Disturb (F01)
Used in conjunction with either automatic VMS cover or manual VMS cover, this button lets a subscriber send calls immediately to his or her mailbox (instead of ringing the extension first).
To program a Do Not Disturb (DND) button as specified on Form C:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed.
3.Press a programmable button with lights.
4.Press [ Feature ] [ 0 ] [ 1 ].
5.At this point, do one of the following:
■Go to Step 3 of the next procedure to program another button for this extension.
■Press [ Central Tel Program ] and go to Step 2 of any button programming procedure in this section to program a button for a different extension.
■Press [ Feature ] [ 0 ] [ 0 ] to exit.
Voice Mailbox Transfer (F14)
This button lets any system user transfer calls directly to PARTNER Voice Messaging without ringing the extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed.
3.Press a programmable button.
4.Press [ Feature ] [ 1 ] [ 4 ].