Lantronix 900-691-R manual Introduction, Key Features

2:Introduction

This chapter summarizes the basic information and features of the xPico Wi-Fi embedded device server.

Key Features

Wireless LAN Interface:

-IEEE 802.11 b/g and IEEE 802.11n (single stream)

-WLAN interface (2.4 GHz only)

-IEEE 802.11 d/h/i/j/k/w/r

-IEEE 802.11i Support - WEP(Client only), WPA-Personal, WPA2-Personal

-u.FL connector for external antenna

-Soft Access Point with DHCP Server

-Simultaneous SoftAP and Client

-Roaming: continually tracks Wi-Fi signal strength within range, resulting in smooth and automatic transition between access points without delay.

-QuickConnect: Dynamic Profiles facilitate easy and rapid connections to access points

Host Interface:

-Serial Interface

Two Serial CMOS Ports 1200 to 921.6 Kbps Flow control: XON/XOFF, RTS/CTS (Line 1 only) Lantronix tunneling application

Modem Emulation Mode

-SPI Interface

Configurable slave/master SPI interface that can be clocked at 30MHz.

-USB Interface 2.0 (device)





USB2.0 (12 Mbps) Full Speed Device port interfaces for connection to an upstream USB device.

Support for USB CDC Serial profile (Future Release, contact Lantronix for more information).

-GPIO Interface

8 configurable general purpose Input/Output pins Custom pin manager

Network Protocols: TCP/IP, UDP/IP, DHCP Server (software-enabled Access Point interface), ARP, ICMP, DHCP Client (WLAN interface), Auto-IP, DNS, HTTP

Management and Control:

-Web Server

xPico® Wi-Fi® Embedded Device Server User Guide 13