Appendix A: Command Reference
configitem IP Address
value
IP Address may be entered alone, in CIDR form, or with an explicit mask: 192.168.1.1 (default mask)
192.168.1.1/24 (CIDR)
192.168.1.1 255.255.255.0 (explicit mask)
The IP Address will be displayed always in CIDR, the canonical form. IP Address may contain up to 31 characters.
configitem Default Gateway
value
The Default Gateway is used only if DHCP Client is disabled, and provides the IP Address of the router. This setting is not applicable to the Access Point.
Default Gateway may contain up to 15 characters.
configitem Hostname
value
Hostname must begin with a letter or number, continue with letter, number, or hyphen, and must end with a letter or number.
If DHCP Client is enabled, the Hostname is sent to the remote DHCP Server and may figure into the address assignment.
This setting is not applicable to the Access Point. Hostname may contain up to 63 characters.
configitem Primary DNS
value
The Primary DNS is the first choice when performing a Domain Name lookup. This setting is not applicable to the Access Point.
Primary DNS may contain up to 15 characters.
configitem Secondary DNS
value
The Secondary DNS is the second choice when performing a Domain Name lookup. This setting is not applicable to the Access Point.
Secondary DNS may contain up to 15 characters.
configgroup Line
These settings pertain to the Serial Line. Changes take effect immediately.
xPico® | 80 |