Lantronix 900-691-R Wlan Profile Security Settings, Wlan Profile Description Security Settings

4: Network Settings

Using CLI

To enter the WLAN Profile command level: config -> WLAN Profile <instance>

Using XML

Include in your file: <configgroup name = "WLAN Profile" instance = "name">

	Table 4-5 WLAN Profile Basic Settings
WLAN Profile Basic	Description
Settings
Network Name (SSID)	Specify the name of the wireless network (SSID.)
State	Select to enable or disable this profile.

	Table 4-6 WLAN Profile Security Settings
WLAN Profile	Description
Security Settings
Suite	Specify the security suite to be used for this profile.
	 None = no authentication or encryption method will be used.
	 WEP = Wired Equivalent Privacy
	 WPA = WiFi Protected Access
	 WPA2 = Robust Secure Network.
Key Size	Select the appropriate key size in bits. Select 40 for WEP40 and WEP64; select
	104 for WEP104 and WEP128.
	Note: This option is available if WEP suite is selected above.
TX Key Index	Select one of four index listing keys for transmitting data. Reception is allowed
	with all four keys.
	Note: For operability with some products that generate four identical keys from a
	passphrase, this index must be one. This option is available if WEP suite is
	selected above.
Key 1-4	Enter one or more encryption keys in hexadecimal format. Enter 10 hexadecimal
	digits (0-9, a-f) for WEP40 and 26 for WEP104. The configured keys are not
	shown for security reasons.
	Note: This option is available if WEP suite is selected above.
WPAx Key Type	Select the format of the security key.
	Note: This configuration option becomes available only when	suites, WPA	or
	WPA2 are selected.
WPAx Key	Enter the WPAx key.
	Note: This configuration option becomes available only when	suites, WPA	or
	WPA2 are selected and the Hex key type is selected.

xPico® Wi-Fi® Embedded Device Server User Guide 27