6: Tunnel Settings
Command | Description |
ATUn | Accept unknown commands. (n=0: off, n=1: on). |
|
|
ATVn | Verbose mode (n=0: numeric result codes, n=1: text result codes.) |
|
|
ATXn | Command does nothing and returns OK status. |
|
|
ATZ | Restore active settings from defaults. |
|
|
AT&F | Reset saved settings in NVR to factory defaults. |
|
|
AT&V | Display current and saved settings. |
|
|
AT&W | Save active settings to NVR. |
|
|
AT&Z | Restore active settings from NVR. |
|
|
A/ | Repeat last command. |
|
|
+++ | Switches to command mode if entered from serial port during connection. |
|
|
xPico® | 42 |