Lantronix 900-691-R manual Protocol Support, Troubleshooting Capabilities

2: Introduction

-CLI (Serial Monitor Port)

-XML Configuration Import and Export (XCR, XML Status Export [XSR])

-WebAPI

-Field upgradable firmware (OTA)

-Power Management Framework

-OEM Support Kit

-Simple Customization and device configuration management

Security:

-256-bit AES encryption

Architecture:

-ARM Cortex-M3 class processor with on-chip Flash and SRAM

-1 MB Flash and 128KB SRAM

-SPI Flash 1 MB

-Zero Host Load Driver

Physical Interface: 40-pin Board-to-Board SMT Connector

Certifications: FCC, IC, EU, Japan, UL, CE

Warranty: 5-Year Limited

Protocol Support

The xPico Wi-Fi embedded device server contains a full-featured IP stack. Supported protocols include:

IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)

802.11i - WPA-Personal, WPA2-Personal

Soft-AP with DHCP Server

HTTP Server

TCP/IP, UDP/IP, DHCP Server (Software enabled Access Point interface), ARP, ICMP, DHCP Client (WLAN interface), Auto-IP, DNS

Troubleshooting Capabilities

The xPico Wi-Fi device offers the abilty to view Trouble Log messages (see Line Settings on page 30).

xPico® Wi-Fi® Embedded Device Server User Guide 14