Lantronix 900-691-R manual Roles, Active in Role

	7: Configurable Pin Manager
CPM – CPs Status (continued)	Description
Active in Role	Indicates the current active role that uses this pin. If there is currently
	no role, <available> will display. Click a specific action as desired for
	the configurable pin:
	 Usage Input
	 Usage Output
	 Usage Unused
	 Assert High
	 Assert Low
	 Mode Push-Pull
	 Mode Weak Pullup
	 Value 0
	 Value 1

Note: To modify a CP, all roles in which it is a member must be disabled.

Note: The changes to a CP configuration are not saved in FLASH. Instead, these CP settings are used when the CP is added to a CP Role. When the CP Role is saved, its CP settings are saved with it. Thus, a particular CP may be defined as "Input" in one role but as "Output" in another. Only one role containing any particular CP may be enabled at once.

Roles

The CP Role settings allow for the management of CP roles. Roles are configurable, may be enabled or disabled and can be assigned or unassigned to a configurable pin. A role, based on its state, can trigger outside events. Only an enabled role can be a trigger.

xPico Wi-Fi roles available for assignment to a configurable pin include the following:

Role AP Trigger

Role Line 1 DSR

Role Line 1 DTR

Role Line 2 DSR

Role Line 2 DTR

Role Line 2 Flow.CTS

Role Line 2 Flow.RTS

Role SPI.CS

Role SPI.INT

Role SPI.MISO

Role SPI.MOSI

Role SPI.SCK

The items listed in the Table 7-3can be configured for each role.

xPico® Wi-Fi® Embedded Device Server User Guide 44