Lantronix 900-691-R manual Wlan Quick Connect Description Settings, Scan network Ssid

4: Network Settings

Using XML

 Not applicable.

	Table 4-8 WLAN Quick Connect
WLAN Quick Connect	Description
Settings
Network Name (search field)	Enter a network name and click Scan to search for a network.
Scan “<network SSID>”	Perform a scan for devices within range of the xPico Wi-Fi. Including the
	optional network SSID limits the scan to devices configured with the
	specified network SSID. Omitting the network SSID performs a scan for all
	devices in range.
Network Name (link)	Lists the SSID of a network. Click a specific Network Name to display the
	Quick Connect profile. If you provide the Password for a specific Quick
	Connect Profile, you can add that profile to your list of WLAN Profiles. Up
	to four WLAN profiles may be added, and only one may be connected at
	any given time.
BSSID	Lists the basic service set identifier. This is a unique 48-bits address that
	identifies the access point that creates the wireless network.
CH	Provides the channel number of a network.
RSSI	Displays an instantaneous value indicating the signal strength of the
	network. The best to worst signal strength is indicated by green, yellow and
	red respectively.
	Note: RSSI reported in scan results is a single sampling.
Security Suite	Lists the security suite of a network (e.g., WEP, WPA, WPA2).

xPico® Wi-Fi® Embedded Device Server User Guide 29