Lantronix 900-691-R manual To Configure Line Settings, To View Line Status, Xoff Char, Gap Timer

	5: Interface Settings
Line Settings	Description
Xoff Char	Specify the Xoff Character which is used when Flow Control is set to
	Software. Set the prefix in one of the three ways:
	 Prefix decimal with prefix hexadecimal and 0x
	 Prefix hexadecimal with 0x
	 Prefix as a single control character with <control>
Gap Timer	Set the Gap Timer delay to Set the number of milliseconds to pass from the
	last character received before the driver forwards the received serial bytes.
	By default, the delay is four character periods at the current baud rate
	(minimum 1 msec). Gap Timer range is 1 to 5000 milliseconds.
Threshold	Set the number of threshold bytes which need to be received in order for the
	driver to forward received characters. Default value is 56 bytes.

To Configure Line Settings

Note: The following section describes the steps to view and configure Line 1 settings; these steps apply to other line instances of the device.

Using Web Manager

To configure a specific line, click Line in the menu and select Line 1 -> Configuration (Table 5-1).

Using CLI

To enter the Line command level: config -> Line <instance>

Using XML

Include in your file: <configgroup name = "Line" instance = "1">

To View Line Status

Using Web Manager

To view statistics for a specific line, click Line in the menu and select Line 1 -> Status.

Using CLI

To enter the Line command level: status -> Line <instance>

Using XML

 Look for the status header: <statusgroup name = "Line" instance = "1">

xPico® Wi-Fi® Embedded Device Server User Guide 31