Appendix A: Command Reference
configitem Instance
value
Instance may contain up to 16 characters.
configitem Password
value
Password may contain up to 32 characters.
The value is HIDDEN.
configgroup WLAN Profile
These settings pertain to a WLAN Profile on the device.
In the Security section, choice of Suite, Key Type and Authentication affect the makeup of other configurables in that section.
In the Advanced section, if Power Management is enabled, specify the Power Management Interval.
Use the Apply button to try out settings on the WLAN without saving them to Flash. If the settings do not work, when you reboot the device, it will still have the original settings.
Use the Submit button to both update the WLAN settings and save them to Flash.
If the device is connecting to an acess point on a different wireless channel, current connection to the soft AP interface of the device may be dropped due to the switch of channel. Reconnect to the soft AP interface in order to continue access to the device.
configitem Instance
value
Instance may contain up to 35 characters.
configitem Basic
value Network Name
Network Name may contain up to 32 characters.
value State
State may be "Enabled" or "Disabled".
configitem Security
value Suite
Suite may be "None", "WEP", "WPA" or "WPA2". value WEP Key Size
Key Size may be "40" or "104". value WEP TX Key Index
TX Key Index may be "1", "2", "3" or "4". value WEP Key Key
Key may contain up to 13 bytes.
xPico® | 85 |