Appendix A: Command Reference
configitem Name
value
The Name is for display purposes only.
Name may contain up to 25 characters.
configitem State
value
Enable the State to allow the Serial Line to operate.
State may be "Enabled" or "Disabled".
configitem Protocol
value
Protocol selects the application to connect to the Line: None selects no application to connect to the Line.
Tunnel sets up the Line to work with the Tunnel application. See the Tunnel configuration options for details.
Trouble Log sets up an
PEmergency A Alert
C Critical E Error W Warning N Notice
I Informational D Debug
Command Line sets up a user interface containing commands to show device status and to change configuration. Simply paste in XML configuration to apply its settings to the device.
Protocol may be "Command Line", "Modem Emulation", "Monitor", "None", "Trouble Log" or "Tunnel".
configitem Baud Rate
value
When specifying a Custom baud rate in the Web Manager, select 'Custom' from the drop down list and then enter the desired rate in the text box.
Baud Rate has units of bits per second.
configitem Parity
value
Parity may be "None", "Even" or "Odd".
configitem Data Bits
value
Data Bits may be "7" or "8".
xPico® | 81 |